The seat shall be 17 in to 19 in (430 mm to 485 mm) high measured from the bathroom floor and shall extend the full depth of the stall....
Search Results "Counter Depth"
Commonly Searched Documents
- 
    
  
  4.34.5.5(2) Seat
  
- 
    
  
  M302.2.3 Transfer Sides
  The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface.... 
- 
    
  
  11B-1009.5.4 Transfer steps
  The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level. [2010 ADAS] Advisory 1009.5.4 Transfer Steps.... 
- 
    
  
  11B-1009.5.4 Transfer steps
  The surface of the bottom tread shall extend to a water depth of 18 inches (457 mm) minimum below the stationary water level. Advisory 11B-1009.5.4 Transfer steps.... 
- 
    
  
  City of XXX – ADA Transition Plan
  sign Install sign 2/4 Facilities manager $40 Maintenance and repairs City clerk Counter... 
- 
    
  
  Handpumps and Water Systems
  As the depth of the well increases, so does the force necessary to draw water, so most handpumps require a force greater than 5 pounds (2.2 newtons) to operate.... 
- 
    
  
  804.2 Clearance
  Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware.... 
- 
    
  
  804.2 Clearance
  Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware.... 
- 
    
  
  1005.2.1.1 Dispersion
  Different fishing locations may provide varying water depths, shade (at certain times of the day), vegetation, and proximity to the shoreline or bank.... 
- 
    
  
  406.8 Detectable Warnings
  The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum... 
- 
    
  
  M301.2.3 Transfer Sides
  The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface.... 
- 
    
  
  General Tips
  If service counters are too high for some users, such as people of short stature and people using wheelchairs, step around counters to provide service.... 
- 
    
  
  804.2 Clearance
  Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware.... 
- 
    
  
  §382.57(d)
  automated kiosk, assisting a passenger who due to his or her disability cannot use an accessible automated kiosk by allowing the passenger to come to the front of the line at the check-in counter... 
- 
    
  
  § 382.57(d)
  automated kiosk, assisting a passenger who due to his or her disability cannot use an accessible automated kiosk by allowing the passenger to come to the front of the line at the check-in counter... 
- 
    
  
  Kitchen Work Surfaces
  One commenter stated that "Element 12" in the chart accompanying the Guidelines for Requirement 2 (public and common use areas) seems to require a portion of the kitchen counters to be accessible... 
- 
    
  
  11B-1005.2.1.1 Dispersion
  Different fishing locations may provide varying water depths, shade (at certain times of the day), vegetation, and proximity to the shoreline or bank.... 
- 
    
  
  R406 Reach Ranges (Section-by-Section Analysis)
  reach ranges differ from the 2004 ADA and ABA Accessibility Guidelines in that forward reach over an obstruction is not permitted, and side reach over an obstruction is permitted where the depth... 
- 
    
  
  M301.4.2 Clearance Around Base
  clearance shall be 26 inches (660 mm) wide maximum at the edge of the examination surface and shall be permitted to increase at a rate of 1 inch (25 mm) in width for each 3 inches (75 mm) in depth... 
- 
    
  
  M302.4.2 Clearance Around Base
  clearance shall be 26 inches (660 mm) wide maximum at the edge of the examination surface and shall be permitted to increase at a rate of 1 inch (25 mm) in width for each 3 inches (75 mm) in depth... 
- 
    
  
  11B-1005.2.1.1 Dispersion
  Different fishing locations may provide varying water depths, shade (at certain times of the day), vegetation, and proximity to the shoreline or bank.... 
- 
    
  
  11B-1005.2.1.1 Dispersion
  Different fishing locations may provide varying water depths, shade (at certain times of the day), vegetation, and proximity to the shoreline or bank. ◼... 
- 
    
  
  4.3.5.3 180-degree turn around an obstacle 
  In our research, we studied the impact of keeping the depth of the turning area and the entry/egress aisle width identical.... 
- 
    
  
  StaLok
  StaLok arrives pre‐mixed with ¼ inch minus aggregate and is applied at a 2-inch depth on top of the base.... 
