It references dimensions of clearance height and depth to the forward-most point on the person or mobility device (e.g., toe, footrest)....
Search Results "Children's Dimension"
-
Knee Clearance: Clearance as Measured from Anterior-Most Point - Manual Wheelchair
-
Knee Clearance: Clearance as Measured from Dorsal Foot Point - Manual Wheelchair
It references dimensions of clearance height and depth to the dorsal foot point on a person (e.g., top of ankle)....
-
1.2.1
1.2.1 Use the plus - or - minus symbol (±) after a dimension when it must be made clear what the expected tolerance is. This should be coordinated with the specification requirements....
-
11B-407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1 _|Braille Dimensions|_....
-
Altered Rides
Rides designed for children, assisted on and off by an adult, are only required to provide an accessible route to the ride and a turning space in the load and unload area....
-
Other Road and Shared Use Path Users
Electric toys for children-Small electric devices, usually with four wheels, often designed to emulate full size adult motor vehicles....
-
Section 37.27 Transportation for Elementary and Secondary Education Systems
This extension also applies to transportation of pre-school children to Head Start or special education programs which receive Federal assistance....
-
11B-216.12 Amusement rides
Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces...
-
11B-216.12 Amusement rides
Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces...
-
Family members and friends as interpreters. (Section-by-Section Analysis)
Some representatives of pediatricians objected to this provision, stating that parents of children with disabilities often know best how to interpret their children's needs and health status...
-
11B-903.4 Back support
The bench shall provide for back support or shall be affixed to a wall along its long dimension....
-
11B-903.4 Back support
The bench shall provide for back support or shall be affixed to a wall along its long dimension....
-
Clarification on Standard Roll-In Shower Compliance
Standard roll-in type shower compartments shall be 30 inches (762 mm) wide minimum by 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
-
Inpro Corporation Endurant® Stainless Steel Straight Grab Bar
FEATURES: 1 1/4" grab bar diameter allows for a better grip for women and children Offers a secure and safe installation by giving the installer the flexibility to choose...
-
F216.12 Amusement Rides
Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces...
-
B. Distribution of Funds
., number of persons receiving Aid to Families with Dependent Children or with limited English speaking ability] if the factor is included to compensate for past discrimination or to comply...
-
President’s Panel on Mental Retardation
Future administrations continue the effort, expanding its goals to include training in academic, vocational and social skills to enable children with intellectual disabilities to reach their...
-
216.12 Amusement Rides
Amusement rides designed primarily for children, amusement rides that are controlled or operated by the rider, and amusement rides without seats, are not required to provide wheelchair spaces...
-
8.1 Excluded Populations Needing Future Attention
The numbers of children and youth under age 18 living with disabilities is growing and will continue rising in coming decades....
-
Urinal Depth
In the proposed rule, the Board sought to clarify the requirement in the original ADAAG that accessible urinals have an "elongated" rim by specifying a minimum dimension of 13 ½ inches,...
-
5.2.1.4 Transfer Surface Size for Imaging Equipment
The transfer surface should be located such that the long dimension of 28 inches is located parallel to the patient scanning/imaging side of the table....
-
407.12.3.1 Unobstructed Forward Reach (Section-by-Section Analysis)
These dimensions and their resulting geometry are consistent with the ADA and ABA Accessibility Guidelines (36 CFR Part 1191, Appendix D, sections 306 and 308)....
-
4.10.3 Hall Call Buttons
Call buttons shall be a minimum of 3/4 in (19 mm) in the smallest dimension. The button designating the up direction shall be on top. (See Fig. 20.) Buttons shall be raised or flush....
-
4.10.3 HALL CALL BUTTONS
Call buttons shall be a minimum of 3/4 in (19 mm) in the smallest dimension. The button designating the up direction shall be on top (see Fig. 20). Buttons shall be raised or flush....
