382.129 What other requirements apply when passengers’ wheelchairs, other mobility aids, and other assistive devices must be disassembled for stowage?...
Search Results "Area of Rescue Assistance"
Commonly Searched Documents
-
382.129 What other requirements apply when passengers’ wheelchairs, other mobility aids, and other assistive devices must be disassembled for stowage?
- OPENspace
-
Technical Memorandum TM 2013-21 Employee Work Areas
TM 2013-21 Employee Work Areas Effective Date: October 3, 2013 2012 TAS Reference: 203.9 and 206.2.8 ...
- Magnetic Switch (BE9023)
- Smoke Alarm Transmitter (BE1284)
- Demonstration of Humanware's Trekker Breeze+ by Peter Tucic
-
806.2.3 Sleeping Areas
At least one sleeping area shall provide a clear floor space complying with 305 on both sides of a bed....
-
806.2.3 Sleeping Areas
At least one sleeping area shall provide a clear floor space complying with 305 on both sides of a bed....
-
Q7: Curb Ramp for a Sidewalk that is Not Made of Concrete or Asphalt
A7: The Joint Technical Assistance states that "the ADA does not require installation of ramps or curb ramps in the absence of a pedestrian walkway with a prepared surface for pedestrian...
- Flash Receiver (BE1442)
-
Handrails: ADA Standard Section 1008.2.5.3
Where required on ramps serving play components, the handrails shall comply with 505 except as modified by 1008.2.5.3. EXCEPTIONS: 1. Handrails shall not be required on ramps...
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer. The...
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
11B-247.1.2.5 Blended transitions
11B-247.1.2.5 Blended transitions. Blended transitions shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.5.
-
11B-705.1.2.5 Blended transitions
Detectable warnings at blended transitions shall be 36 inches (914 mm) in width.
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading. Advisory 11B-1002.5 Amusement ride seats designed...
-
Section 810.2.2
Section 810.2.2 The Department recognizes that there will be some situations in which the full dimensions of a bus boarding and alighting area complying with the §810.2.2 may not be able...
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
-
Section 35.151(i) Curb Ramps (Section-by-Section Analysis)
The Department has made a minor editorial change, deleting the phrase "other sloped areas" from the two places in which it appears in the current rule. ...
-
12207(c)(1) In general
(1) In general Congress reaffirms that nothing in the Wilderness Act (16 U.S.C. 1131 et seq.) is to be construed as prohibiting the use of a wheelchair in a wilderness area by an individual...
- Alarm Clock Pro (Stand-alone alarm clock) (BE1370)
-
Section 35.151(i) Curb ramps (Section-by-Section Analysis)
In the NPRM, the Department proposed making a minor editorial change to this section, deleting the phrase ‘‘other sloped areas'' from the two places in which it appears in the 1991 title...
-
11B-407.4.1 Car dimensions
Exception: In existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor area...