Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
Search Results "Serving Area"
Filters
Commonly Searched Documents
-
11B-1008.2.6.1 Accessibility
-
11B-1008.2.5.3.2 Handrail height
The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.
-
F221.2.1 Number and Location
Wheelchair spaces shall be provided complying with F221.2.1.
-
1008.2.6.1 Accessibility
1008.2.6.1 Accessibility. Ground surfaces shall comply with ASTM F 1951 (incorporated by reference, see "Referenced Standards" in Chapter 1). Ground surfaces shall be inspected and...
-
Accessible Play Components
Accessible Play Components. Accessible play components are required to be on accessible routes, including elevated play components that are required to be connected by ramps. These...
-
1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951 (incorporated by reference, see "Referenced Standards" in Chapter 1). Ground surfaces shall be inspected and maintained regularly and...
-
1008.2.5.3.2 Handrail Height
The top of handrail gripping surfaces shall be 20 inches (510 mm) minimum and 28 inches (710 mm) maximum above the ramp surface.
-
1008.2.5.3.2 Handrail Height
The top of handrail gripping surfaces shall be 20 inches (510 mm) minimum and 28 inches (710 mm) maximum above the ramp surface.
-
Landings
Landings Landings are the level surfaces at the top and bottom of each ramp run. Must be as wide as the ramp they connect to A minimum length of 60 inches (1525...
-
§301(7)(D)
An auditorium, convention center, lecture hall, or other place of public gathering;
-
221.2.1 Number and Location
Wheelchair spaces shall be provided complying with 221.2.1.
-
Parking Spaces for Vehicles Other Than RVs [F244.2.3.2.2]
Parking spaces for vehicles other than RVs within camping units with mobility features must comply with the following technical requirements for width, surface, and slope.
-
12162(a)(4)(B)(i)
(i) if such train includes a bi-level lounge car purchased after July 26, 1990, table service in such lounge car shall be provided to individuals who use wheelchairs and to other...
-
221.2.1 Number and Location
221.2.1 Number and Location. Wheelchair spaces shall be provided complying with 221.2.1.
-
1008.2.5.3.2 Handrail Height
1008.2.5.3.2 Handrail Height. The top of handrail gripping surfaces shall be 20 inches (510 mm) minimum and 28 inches (710 mm) maximum above the ramp surface.
-
6. Regulatory Analyses
[See subsections ...]
-
Dining Room
Outlets for platform lifts in the DR, spa, and one guest room Clearstory lighting to add extra light without extra cost Computer monitors in the DR, spa and LR...
-
4. Changes Made to the Proposed Rule
We issued a proposed rule in 2007. See 72 FR 34074 (June 20, 2007). The proposed rule was based on the report of a regulatory negotiation committee. We released a draft of the final...
-
1015.2 Clear Ground Space
This section requires a clear ground space 36 inches minimum by 48 inches minimum positioned for either a forward or parallel approach to be provided at each distinct viewing...
-
1015.6 Slope
This section requires the slope of the surface of the clear ground space and turning space to not be steeper than 1:48 in any direction. Where the surface is other than asphalt,...
-
G. Alterations and New Construction:
Any renovations or alterations, as defined in 42 U.S.C. §12183, made to The Palace and not described in this Agreement shall comply in all respects with the ADA, its...
-
11B-1008.2.5.3.2 Handrail height
The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.
-
11B-221.2.1 Number and location
Wheelchair spaces shall be provided complying with Section 11B-221.2.1.
-
11B-221.2.1 Number and location
Wheelchair spaces shall be provided complying with Section 11B-221.2.1.