Where the diagnostic equipment is used in a reclined position, head and back support shall be provided and shall comply with M305.5.
Search Results "Rectangular Seat"
Filters
Commonly Searched Documents
-
M302.3.3 Head and Back Support
-
M302.2.4 Transfer Sides
Options to transfer from a mobility device shall be provided on two adjoining sides of transfer surfaces. EXCEPTION: Options to transfer to or from a mobility device onto...
-
M303.2 Wheelchair spaces (Section-by-Section Analysis)
This is an introductory section.
-
EXHIBIT B
EXHIBIT B The average anthropometric dimensions employed shall be: (1) average eye height for a person sitting in a wheelchair is 47.45"; (2) horizontal distance from the eye of...
-
5.2.3 Transfer Surface Measurement
5.2.3 Transfer Surface Measurement. The transfer surface should be measured from the center-point of each side of the transfer surface.
-
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests. The 17 inch minimum depth and 21 inch minimum width should be located on both sides of examination chairs with a fixed...
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests Some examination chairs have footrests that get in the way of entry from the foot end, such as dental...
-
§ 35.138(i) Purchasing multiple tickets
(i) Purchasing multiple tickets.
-
CHAPTER 9: BUILT-IN ELEMENTS
CHAPTER 9: BUILT-IN ELEMENTS
-
M302.2.3 Transfer Sides
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface. Each transfer side...
-
M303.2.3 Depth
Where wheelchair spaces can be entered from the front or rear, the wheelchair space shall be 48 inches (1220 mm) deep minimum. Where wheelchair spaces can be entered only from the...
-
M302.3.3 Head and Back Support
Where the diagnostic equipment is used in a reclined position, head and back support shall be provided. Where the incline of the back support can be modified while in use, head and...
-
M303.2.2 Width
Wheelchair spaces shall be 36 inches (915 mm) wide minimum.
-
§ 35.138(d) Purchasing multiple tickets
(d) Purchasing multiple tickets.
-
2. Equipment Clearances for Breast Platforms
The MDE NPRM proposed knee and toe clearance requirements for diagnostic equipment used by patients seated in wheelchairs that paralleled the knee and toe clearance requirements from the...
-
Sloan WETS 2050.1001-1.28 Manual HET Flushometer and HET Wall Hung Water Closet
Designed to meet ADA standards when bowl is 17" - 19" high including seat....
-
TOTO® MS854114EL Commercial Eco UltraMax One-Piece Toilet ADA Height
Comes with SoftClose seat or optional Washlet upgrade....
-
Study Objectives
Level, highest and lowest heights for transfers to i) a seat with no handhelds present, ii) a seat with grab-bars and iii) a seat with grab-bars and a backrest. b....
-
Location and Size
appropriate for the location and size of transfer supports on diagnostic equipment used by patients in a supine, prone, or side-lying position, and diagnostic equipment used by patients in a seated...
-
M303.2.5 Surfaces (Section-by-Section Analysis)
The MDE NPRM proposed to require diagnostic equipment used by patients seated in a wheelchair to provide a wheelchair space with a surface that does not slope more than 1:48 in any direction...
-
Whitehall Mfg. WH2142W2 Ligature-Resistant Toilet Wall Supply On-Floor Wall Waste
Features: Siphon Jet type toilet with elongated bowl, configured for front mounted, on-floor installation. The toilet is fabricated with 16 gage 304 stainless steel with exterior...
-
Whitehall Mfg. Ligature Resistant Toilet Top Supply On-Floor
Model Number: WH2142-T-3 Series Features: Siphon Jet type toilet with elongated bowl, configured for front mounted, on-floor installation. The toilet is fabricated with 16...
-
Whitehall Mfg. WH2142T2 Ligature Resistant Toilet Top Supply On-Floor Wall Waste
Features: Siphon Jet type toilet with elongated bowl, configured for front mounted, on-floor installation. The toilet is fabricated with 16 gage 304 stainless steel with exterior...
-
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND OLYMPIA ENTERTAINMENT, INC. REGARDING JOE LOUIS ARENA
SETTLEMENT AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND OLYMPIA ENTERTAINMENT, INC. REGARDING JOE LOUIS ARENA DJ# 202-37-197
