Gaps Where wheelchair spaces are provided on amusement rides, the floors of rides must be coordinated with the floors of the load and unload areas so that when the ride is at...
Search Results "Recreational Boating Facility"
Filters
Commonly Searched Documents
-
Gaps
-
Protruding Objects [1016.9]
Objects that protrude into ORARs, passing spaces, and resting intervals can pose hazards to people who are blind or have low vision. Constructed elements, such as signs on ORARs,...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces. Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where...
-
2.2 Surface
The surface of an ORAR shall be firm and stable. The type of surface should be appropriate to the setting and level of development.
-
2.5.1 Location
A resting interval shall be provided between each ORAR segment, in compliance with section 2.4.1. Depending on the design and location, the intersection of two ORARs may act as a...
-
2.4.2 Cross Slope
The cross slope of an ORAR shall be no more than 1:33 (3 percent). Where the surface is paved or is elevated above the natural ground, the cross slope shall not be steeper than 1:48...
-
1016.7.2 Cross Slope
The cross slope shall not be steeper than 1:48. EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm)...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm)...
-
1010 Shooting Facilities with Firing Positions
This section requires turning space at firing positions required to be accessible.
-
1010 Shooting Facilities with Firing Positions
[See subsections ...]
-
F243 Shooting Facilities with Firing Positions
[See subsections ...]
-
1010 Shooting Facilities with Firing Positions
[See subsections ...]
-
243 Shooting Facilities with Firing Positions
[See subsections ...]
-
Requirements to Remember for: New Construction of Facilities
[See subsections ...]
-
Requirements to Remember for: Alterations or Additions to Facilities
[See subsections ...]
-
DIVISION 6: PLUMBING ELEMENTS AND FACILITIES
[See subsections ...]
-
DIVISION 6: PLUMBING ELEMENTS AND FACILITIES
[See subsections ...]
-
DIVISION 6: PLUMBING ELEMENTS AND FACILITIES
[See subsections ...]
-
§ 35.150(b)(2)(ii)(G) Miniature golf facilities
(G) Miniature golf facilities, sections 239 and 1007; 206.2.16....
-
Shelves for Portable TTYs: ADA Standard Section 217.5
Section 217.5 covers scoping requirements in the current ADA Standards for shelves for portable TTYs.
-
Users and Needs
Users and Needs Facility Types and User Profiles. Many of the facilities reviewed were healthcare and residential facilities specifically designed for older adults....
-
Accessible Route to Parking Garages
Section 206.4.2 covers access to pedestrian connections between parking structures and facility entrances. In the proposed rule, this requirement referred to "parking garages."...
-
11B-217.5 Shelves for portable TTYs
Exceptions: Secured areas of detention and correctional facilities where shelves and outlets are prohibited for purposes of security or safety shall not be required to comply with...