A folding or non-folding seat shall be provided in transfer type shower compartments....
Search Results "Compartment Depth"
Filters
Commonly Searched Documents
-
608.4 Seats
-
608.2.2.1 Clearance
A 30 inch (760 mm) wide minimum by 60 inch (1525 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
11B-213.3.4 Lavatories
Where lavatories are provided, at least ten percent but no fewer than one shall comply with Section 11B-606 and shall not be located in a toilet compartment. ...
-
608.4 Seats (Exception)
608.4 Seats (Exception) This section requires a folding or non-folding seat to be provided in transfer type shower compartments....
-
Salsbury Industries Designer Wood Locker Single Tier 3 Wide
cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
-
Salsbury Industries Designer Wood Locker Single Tier 1 Wide
cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
-
408.4.1 Car Dimensions and Doors
Elevator cars shall provide a clear width 42 inches (1065 mm) minimum and a clear depth 54 inches (1370 mm) minimum....
-
407.8.3.2.2 Knee and Toe Space under ICT with Obstructed Forward Reach
Toe space shall be permitted to provide a clear height of 9 inches (230 mm) minimum above the floor and a clear depth of 6 inches (150 mm) maximum from the vertical reference plane toward...
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
-
604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with 604.3....
-
604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with 604.3....
-
610.1 General
Seats in bathtubs and shower compartments shall comply with 610....
-
604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with 604.3....
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
-
5.8.2 Knee and Toe Clearance Recommendations under Breast Platform Recommendations
The proposed provision requires the depth of wheelchair spaces to include knee and toe clearance....
-
604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with 604.3....
-
11B-604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with Section 11B-604.3....
-
11B-604.3 Clearance
Clearances around water closets and in toilet compartments shall comply with Section 11B-604.3....
-
HEWI Stainless Steel Pull Handles
Pull handles enable accessible ease of use for heavy external and fire compartment doors. They are designed to enable a variable gripping height from 75 to 120 cm....
-
MEASUREMENT TECHNIQUE
MEASUREMENT TECHNIQUE The depth and width are measured along the centerlines of the seat, and the height from the floor to the highest point of the transfer surface: The depth...
-
5.8.2.7 Base Support Allowance
An additional sloped region above the base support is permitted at a depth of 25 inches from the front edge of the breast platform at 1½ inches above the floor, and can extend to a height...
-
408.4.1 Car Dimensions and Doors
Elevator cars shall provide a clear width 42 inches (1065 mm) minimum and a clear depth 54 inches (1370 mm) minimum....
-
11B-809.10.7.1 Floor space
be reduced to 36 inches (914 mm) minimum for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a water closet which extend 24 inches (610 mm) maximum in depth...
-
F213.3.4 Lavatories
Where lavatories are provided, at least one shall comply with 606 and shall not be located in a toilet compartment....
