Review the updated information on the revisions to the ADA Standards regarding classroom acoustics.
Search Results "Back Support"
Commonly Searched Documents
-
Classroom Acoustics: ADA Standard Section 6.
-
Toe Clearance: ADA Standard Section 604.8.1.4
Section 604.8.1.4 covers the current ADA Standards for toe clearance at wheelchair accessible compartments.
-
11B-307.2 Protrusion limits
For example, awnings and their supporting structures cannot reduce the minimum required vertical clearance....
- GameTime Merry-Go-All Play Component
-
Wheelchair Spaces
Persons with disabilities overwhelmingly supported such a change to ensure that people using wheelchair spaces do not have to shift or move out of the way of other pedestrian traffic while...
-
How to Measure Transfer Surface Height
Beds, stretchers, and other types of equipment will have unique features that determine the shapes of their patient support surfaces....
-
Standard Stall
Recommendation: Ceiling-mounted partitions are a good idea because toe clearance is not interrupted by vertical supports [sic] Because floor-mounted toilets commonly project further...
-
3.3.2 Unoccupied Device Length
Second, we measured the unoccupied length of the WhMD while it was in use; thus devices measured with elevated leg supports would be “lengthened.”...
- Equalizer 1000 Series Exercise Machine
- Merlexi Craft™ Liberty MRI Wheelchairs
-
M301.1 General
Diagnostic equipment that supports patients in a supine, prone, or side-lying position shall comply with M301. ...
-
11B-602.5 Spout location
The spout shall be located 15 inches (381 mm) minimum from the vertical support and 5 inches (127 mm) maximum from the front edge of the unit, including bumpers. ...
-
4.26.3(4)
a direct tension force of 250 lbf (1112N) plus the maximum moment from the application of 250 lbf (1112N) shall be less than the allowable withdrawal load between the fastener and the supporting...
-
Research Issues
NIH Mission As you all probably know, much of the biomedical research in the United States is supported by the NIH....
-
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations
5.8.1.2.2 Single Ramped Entry - Edge Protection on the Platform and Platform Sides Recommendations The Committee recommends a two-inch high edge protection on the back of the platform...
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
608.5.3 Alternate Roll-In Type Shower Compartments
controls, faucets, and shower spray unit shall be located on the side wall adjacent to the seat 27 inches (685 mm) maximum from the side wall behind the seat or shall be located on the back...
-
A4.16.5 Flush Controls
Such designs reduce the chance of injury and imbalance caused by leaning back against the fittings....
-
A4.16.5 FLUSH CONTROLS
Such designs reduce the chance of injury and imbalance caused by leaning back against the fittings....
-
Adult Tricycles
Adult tricycles generally have a comfortable, upright sitting position and three large wheels (approximately 650 mm (26 inches) in diameter), one in front and two in back....
-
Angled Van Spaces
Otherwise, consider designing accessible spaces to permit both front-in and back-in parking....
-
Accessible Routes within a Building or Facility
Accessible vertical interior circulation must be in the same area as stairs and escalators, not isolated in the back of the facility....
- Ampetronic CLS2 Wall Mount Perimeter Induction Loop Driver Hearing System
- Ampetronic HLS02 Intercom & Information Point Audio Induction Loop Driver Hearing System