Section 208.2.4 covers scoping requirements in the current ADA standards for van accessible parking spaces.
Search Results "Accessible Seating"
-
Van Parking Spaces: ADA Standard Section 208.2.4
-
11B-206.8 Security barriers
Security barriers, including but not limited to, security bollards and security check points, shall not obstruct a required accessible route or accessible means of egress....
-
11B-206.8 Security barriers
Security barriers, including but not limited to, security bollards and security check points, shall not obstruct a required accessible route or accessible means of egress....
-
11B-1003.2 Accessible routes
Accessible routes serving recreational boating facilities, including gangways and floating piers, shall comply with Division 4 except as modified by the exceptions in Section 11B-1003.2....
-
11B-1003.2 Accessible routes
Accessible routes serving recreational boating facilities, including gangways and floating piers, shall comply with Division 4 except as modified by the exceptions in Section 11B-1003.2....
-
State and Local Access Codes
Most states and many local jurisdictions have laws or ordinances that address access to the built environment....
-
§ 38.75(b)
(b) Where designated wheelchair or mobility aid seating locations are provided, signs shall indicate the location and advise other passengers of the need to permit wheelchair and mobility...
- TOTO Drake® Two-Piece Toilet, 1.6 GPF, ADA Compliant, Elongated Bowl Best Drake 2 Piece ADA Toilet
-
ACCESSIBILITY STANDARDS {35.151}
ACCESSIBILITY STANDARDS {35.151} Public entities may choose either: Uniform Federal Accessibility Standards (UFAS) or Americans with Disabilities Act Accessibility...
-
11B-502.6 Identification
Signs identifying van parking spaces shall contain the designation "van accessible."...
-
11B-502.6 Identification
Signs identifying van parking spaces shall contain the designation "van accessible."...
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
4.32.4* HEIGHT OF WORK SURFACES
The tops of tables and work surfaces shall be from 28 in to 34 in (710 mm to 865 mm) from the floor or ground.
-
F221.2.2 Integration
The requirement that wheelchair spaces be an "integral part of the seating plan" means that wheelchair spaces must be placed within the footprint of the seating area....
-
11B-221.2.2 Integration
The requirement that wheelchair spaces be an "integral part of the seating plan" means that wheelchair spaces must be placed within the footprint of the seating area....
-
11B-221.2.2 Integration
The requirement that wheelchair spaces be an "integral part of the seating plan" means that wheelchair spaces must be placed within the footprint of the seating area....
-
11B-221.2.2 Integration
The requirement that wheelchair spaces be an "integral part of the seating plan" means that wheelchair spaces must be placed within the footprint of the seating area....
-
206 Accessible Routes
206 Accessible Routes...
-
402 Accessible Routes
402 Accessible Routes...
-
Group ticket sales. (Section-by-Section Analysis)
If a group includes one or more individuals who use a wheelchair, the proposed rule requires the facility to place that group in a seating area that includes wheelchair spaces so that, if...
-
703.7 Symbols of Accessibility
Symbols of accessibility shall comply with 703.7....
-
Horse Accessible Gates
Another concern was finding a way to allow horse and pedestrian access, while restricting ATVs and motorcycles....
-
11B-502.3 Access aisle
Access aisles serving parking spaces shall comply with Section 11B-502.3. Access aisles shall adjoin an accessible route....
-
11B-502.3 Access aisle
Access aisles serving parking spaces shall comply with Section 11B-502.3. Access aisles shall adjoin an accessible route....