Section 232.2 covers scoping requirements in the current ADA Standards for general holding cells and general housing cells.
Search Results "Plumbing Facility"
Filters
Commonly Searched Documents
-
General Holding Cells and General Housing Cells: ADA Standard Section 232.2
-
11B-245 COMMERCIAL FACILITIES LOCATED IN PRIVATE RESIDENCES
[See subsections ...]
-
Commercial Facilities in Private Residences (Section-By-Section Analysis and Response to Comments)
Commercial Facilities in Private Residences (Section-By-Section Analysis and Response to Comments) Section 36.401(b) of the final rule is a new provision relating to commercial facilities...
-
11B-210.1 General
In detention and correctional facilities, stairs that are not located in public use areas shall not be required to comply with Section 11B-504. 2....
-
11B-232.2 General holding cells and general housing cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....
-
206.2.3 Multi-Story Buildings and Facilities
206.2.3 Multi-Story Buildings and Facilities. At least one accessible route shall connect each story and mezzanine in multi-story buildings and facilities....
-
Accessible Cells in Correctional Facilities
Many inmates in State and local correctional facilities have mobility disabilities and need to be housed in accessible cells....
-
101.2 Effect on Removal of Barriers in Existing Facilities
Removal of architectural barriers, pursuant to 28 C.F.R. s. 36.304, from buildings, structures or facilities shall comply with this code’s requirements for alterations unless compliance...
-
§ 36.402(b)(1)
maintenance, reroofing, painting or wallpapering, asbestos removal, or changes to mechanical and electrical systems are not alterations unless they affect the usability of the building or facility...
-
Dispersion of Cells
The NPRM did not contain express language addressing dispersion of cells in a facility....
-
§27.71 Airport facilities.
[61 FR 56424, Nov. 1, 1996, as amended at 68 FR 51391, Aug. 26, 2003; 78 FR 67917, Nov. 12, 2013; 80 FR 46513, Aug. 5, 2015]
-
§ 27.71 Airport facilities.
* * * * *
-
11B-212.3 Sinks
A fixed bowl or basin with running water and drainpipe, as in a toilet or bathing facility, for washing or bathing purposes. (As differentiated from the definition of "Sink".). ...
-
11B-212.3 Sinks
Scrub sinks, as defined in California Plumbing Code Section 221.0, shall not be required to comply with Section 11B-606....
-
Proposed Guidelines Developed Specifically for Pedestrian Facilities in the Public Right-of-Way
Proposed Guidelines Developed Specifically for Pedestrian Facilities in the Public Right-of-Way The proposed guidelines are developed specifically for pedestrian facilities in the public...
-
Sec.36.401(b) Commercial facilities located in private residences
(b) Commercial facilities located in private residences. ...
-
F213.3.1 Toilet Compartments
Where toilet compartments are provided, at least one toilet compartment shall comply with 604.8.1. In addition to the compartment required to comply with 604.8.1, at least one...
-
607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum. A lavatory complying with 606 shall be permitted at the control...
-
608.3.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided...
-
11B-213.3.1 Toilet compartments
Where toilet compartments are provided, at least five percent but no fewer than one toilet compartment shall comply with Section 11B-604.8.1. In addition to the compartments required...
-
608.5.1 Transfer Type Shower Compartments
In transfer type shower compartments, the controls, faucets, and shower spray unit shall be installed on the side wall opposite the seat 38 inches (965 mm) minimum and 48 inches...
-
213.3.1 Toilet Compartments
Where toilet compartments are provided, at least one toilet compartment shall comply with 604.8.1. In addition to the compartment required to comply with 604.8.1, at least one...
-
607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum. A lavatory complying with 606 shall be permitted at the control...
-
608.3.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, grab bars shall be provided on the back wall and the side wall farthest from the compartment entry. Grab bars shall not be provided...