The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit. The angle of the water stream shall...
Search Results "Handrail Height"
-
11B-602.6 Water flow
-
11B-602.7 Drinking fountains for standing persons
Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1092 mm) maximum above the finish floor or ground.
-
11B-602.7 Drinking fountains for standing persons
Spout outlets of drinking fountains for standing persons shall be 38 inches (965 mm) minimum and 43 inches (1092 mm) maximum above the finish floor or ground.
-
11B-602.6 Water flow
The spout shall provide a flow of water 4 inches (102 mm) high minimum and shall be located 5 inches (127 mm) maximum from the front of the unit. The angle of the water stream shall...
-
§ 38.39(b)
(b) Characters on signs required by paragraph (a) of this section shall have a width-to-height ratio between 3:5 and 1:1 and a stroke width-to-height ratio between 1:5 and 1:10, with a minimum...
-
A4.15.2 Spout Height
Two drinking fountains, mounted side by side or on a single post, are usable by people with disabilities and people who find it difficult to bend over.
-
7.3 CHECK-OUT AISLES
Clear aisle width shall comply with 4.2.1 and maximum adjoining counter height shall not exceed 36 in (915 mm) above the floor....
-
4.1.7(3)(e)
(e) Displays and written information, documents, etc., should be located where they can be seen by a seated person. Exhibits and signage displayed horizontally (e.g., open books),...
-
4.1.7(2)(e)
(e) Displays and written information, documents, etc, should be located where they can be seen by a seated person. Exhibits and signage displayed horizontally, e.g., books, should be...
-
Conclusion
to floor height (22.1 inches) and to a platform that was 27 inches wide....
-
Position of Grab Bars: ADA Standard Section 609.4
Section 609.4 covers the current ADA Standards for the position of grab bars.
-
11B-609.4 Position of grab bars
The height of the lower grab bar on the back wall of a bathtub shall comply with Section 11B-607.4.1.1 or 11B-607.4.2.1....
-
11B-609.4 Position of grab bars
The height of the lower grab bar on the back wall of a bathtub shall comply with Section 11B-607.4.1.1 or 11B-607.4.2.1....
-
Chapter 2: Methodology
[See subsections ...]
-
Diversified Woodcrafts Lab Table Assembly Video
Quick & easy assembly instructions for this industry-leading table that is featured in science rooms, lab & research facilities throughout the world.
-
Teknion Journal
Designed by Chris Wright and Steve Tsai, Journal is a comprehensive wood casegoods system with a refined modern aesthetic designed to address this need. It is comprised of versatile,...
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
1002.1 Definitions
HANDRAIL. MEANS OF EGRESS PUBLIC WAY. STAIR. STAIRWAY. WINDER...
-
1002.1 Definitions
HANDRAIL. MEANS OF EGRESS PUBLIC WAY. STAIR. STAIRWAY. WINDER...
-
703.4 Installation Height and Location
Signs with tactile characters shall comply with 703.4.
-
703.4 Installation Height and Location
Signs with tactile characters shall comply with 703.4.
-
Wisconsin Bench Manufacturing ADA Locker Benches
Our 20" x 48" and 24" x 48" benches meet ADA requirements. The 1.25" thick standard locker room bench is made from face-glued hardwood strips. Sturdy and smooth sanded surface...
-
Access-Able Designs Adult Dressing Bench D-101-42
Stainless steel frame holds up to 900 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.) Complies w/ ADA 4.21.3 when properly...
-
Access-Able Designs Stationary Dressing Bench DST-101
Adult dressing bench to allow room for undressing/redressing in public rooms Complies w/ ADA 4.21.3 when properly installed. Stainless steel frame holds up to...
