Openings in the surface of ORARs shall be small enough to prevent passage of a 1/2 inch (13 mm) diameter sphere. Where possible, elongated openings should be placed...
Search Results "RERC Rec-Tech: Rehabilitation Engineering Research Center on Recreational Technologies"
-
2.8 Openings
-
F244.5.4 Location
Outdoor recreation access routes required by F244.5.2 and F244.5.3 shall coincide with or be located in the same area as general circulation paths. Advisory F244.5.4 Location....
-
Required Compliance [§206.6]
Questions about the ASME A17.1 code should be directed to the American Society of Mechanical Engineers (www.asme.org)....
-
6. Acquisition or Modification of Equipment and Devices
These devices range from very simple solutions, such as an elastic band that can enable a person with cerebral palsy to hold a pencil and write, to "high-tech" electronic equipment that...
-
A.2.i. - What does Section 508 require?
Section 508 generally requires Federal agencies to ensure that, when developing, procuring, maintaining, or using electronic and information technology, they take into account the needs...
-
4.5 Maneuvering Clearances
Figures 30-32 show key findings from the research. Figure 28 Table 7. U.S....
-
Slope: ADA Standard Section 1002.4.2
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
-
Minimum Number: ADA Standard Section 234.3
Section 234.3 covers scoping requirements in the current ADA Standards for the minimum number of wheelchair spaces required at amusement rides.
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section...
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section...
-
F235.1 General
Recreational boating facilities shall comply with F235....
-
235.1 General
Recreational boating facilities shall comply with 235....
-
1016.6 Openings
This section requires openings in the surface of outdoor recreation access routes, passing spaces, and resting intervals such as spaces between the boards in a boardwalk and drainage grates...
-
11B-235.1 General
Recreational boating facilities shall comply with Section 11B-235. ...
-
12181(7)(I)
(I) a park, zoo, amusement park, or other place of recreation;...
-
11B-235.1 General
Recreational boating facilities shall comply with Section 11B-235....
-
11B-235.1 General
Recreational boating facilities shall comply with Section 11B-235....
-
235.1 General
Recreational boating facilities shall comply with 235....
-
Acceptable SEWF Systems
Because of their reactivity, the stabilizing binders needed to be applied on site or mixed with EWF no longer than 1 h prior to placement on the ground surface. Accordingly, the...
-
Emergency Communications [4.10.14]
Emergency two-way communication devices, where provided, must meet the ASME A17.1‒1990 standard. In order to accommodate people with hearing or speech impairments, ADAAG also...
-
PROVIDING ACCESSIBLE VOTING SYSTEMS AND EFFECTIVE COMMUNICATION
able to read effectively, accurately, and impartially using necessary specialized vocabulary); information in large print or Braille; accessible electronic information and information technology...