Guards shall be located along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured...
Search Results "Perpendicular Curb Ramp"
Commonly Searched Documents
-
1015.2 Where required
-
Surfaces: ADA Standard Section 505.8
Section 505.8 covers the current ADA Standards for handrail gripping surfaces and also any adjacent surfaces to them.
-
11B-505.8 Surfaces
Handrail gripping surfaces and any surfaces adjacent to them shall be free of sharp or abrasive elements and shall have rounded edges.
-
EZ-ACCESS The Transitions Angled Entry Ramp Video
Requires the Registered User plan or above. Login!
-
EZ-ACCESS Transitions Modular Entry Ramp Video
Requires the Registered User plan or above. Login!
- How to Determine the Total Rise of a Ramp Run
-
§ 38.125(c)(3) Ramp threshold
(3) Ramp threshold....
-
§ 38.95(c)(3) Ramp threshold
(3) Ramp threshold....
-
1.1.1
For example, the 1:12 slope stated in ADAAG and ADA/ABAAG is a maximum slope for ramps, not a design requirement....
-
4.8.4* Landings
Ramps shall have level landings at bottom and top of each ramp and each ramp run. Landings shall have the following features:...
-
§ 37.42(f)
vertical gap is more than 5/8 inch, measured when the vehicle is at rest, the horizontal and vertical gaps between the car floor and the boarding platform must be mitigated by a bridge plate, ramp...
-
Doorways [4.8.4]
Recommendation: Ramps and doors should be configured to facilitate wheelchair maneuvering and to prevent open doors from obstructing ramp openings (important along egress routes)....
- Madden Manufacturing Round Handrail (ADA Compliant)
- EZ-ACCESS Transitions® Modular Entry Mat
- PromenAid Handrail System
- EZ-ACCESS Transitions® Angled Entry Mat
- EZ-ACCESS Transitions® Angled Entry Plate
- Hollaender Manufacturing Company ADA Railing Systems
-
3a.
If yes, is a ramp or sloped hallway provided? Yes _____ No _____ If yes, go to question E1-4. Note: A ramp, lift, or elevator can be used to provide access to floor levels....
-
§ 38.159(b)(8) Platform entrance ramp
(8) Platform entrance ramp....
-
4.8.4 LANDINGS
Ramps shall have level landings at the bottom and top of each run. Landings shall have the following features: (1) The landing shall be at least as wide as the ramp run leading to it...
-
T402.11 Gaps
When ramps or bridgeplates are deployed for boarding and alighting, gaps between the ramp or bridgeplate surface and floor of non-rail vehicles shall not permit passage of a sphere more...
- Simplified Building Concepts: Building a D-Return - ADA Components
- EZCurb Ramp - Vertical Barrier Removal Instructional Video