be construed to require the installation of an elevator for facilities that are less than three stories or have less than 3,000 square feet per story unless the building is a shopping center...
Search Results "IDeA Center"
-
12183(b) Elevator
-
1134A.8, Item 4.3
The knee and toe space shall be centered on the fixture, and shall comply with Section 1138A.2....
-
A4.13.9 Door Hardware
To be effective, they should cover the door width, less approximately 2 in (51 mm), up to a height of 16 in (405 mm) from its bottom edge and be centered across the width of the door....
-
Side Approach
Recommendation: The clear floor space should be centered on the ATM unit....
-
1134A.8, Item 4.3
The knee and toe space shall be centered on the fixture, and shall comply with Section 1138A.2....
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
- National Aging and Disability Transportation Center (NADTC)
-
D. Examples of Schools to Which These Guidelines Apply
Note: Subsequent sections of these Guidelines may use the term secondary vocational education center in referring to the institutions described in paragraphs 3, 4 and 5 above or the term...
-
APPENDIX RESOURCES FOR LOCATING REASONABLE ACCOMMODATIONS
Equal Employment Opportunity Commission 1-800-669-3362 (Voice) 1-800-800-3302 (TT) The EEOC's Publication Center has many free documents on the Title I employment provisions of the...
-
III. Enforcement and Implementation
If the United States believes that any of the XL Center Parties has failed to comply in a timely manner with any requirement of this Agreement without obtaining sufficient advance...
- Northwestern University Prosthetics-Orthotics Center (NUPOC)
-
San Juan Center for Independence (SJCI) - Farmington and Gallup, NM
There are over 400 Independent Living Centers in the country. SJCI is one of five IL centers in New Mexico. New Mexico also has four satellite centers....
-
1009.5.2 Transfer Space
transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall be centered...
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
-
Release Planning
To aid in transition, the jail will provide prisoners with details related to a follow up appointment at the relevant mental health center and give them sufficient medications to cover the...
-
COMMERCIAL PLACE OF PUBLIC AMUSEMENT
[DSA-AC] An auditorium, convention center, cultural complex, exhibition hall, permanent amusement park, sports arena, theater or movie house for which the maximum occupancy is 2,500 or more...
- Center for Persons with Disabilities at Utah State University
-
Understanding Toss Prediction in Cricket
Add in weather reports, team combinations, and match conditions, and you can get a pretty reliable idea of what the captain will choose before the toss even happens....
-
5.2.1.2 Transfer Surface Depth Recommendation for M301
Edward Steinfeld, Director of the Center of Inclusive Design and Environmental Access at the University of Buffalo, reported that his research data suggested that a depth of 15 inches would...
-
Front grab bar protocol
The horizontal distance between the center of the grab bar and the mid-center, front edge of the platform was 13.5”. ...
-
Data Analysis
Areas centered around the transfer station were defined and the percentage of the study participants who were able to transfer in that area were calculated....
-
1.1.14 Flatness of ramp cross slope
For ramps up to and including 5 ft (1525 mm) wide between the handrails, measure cross slope in the center of the ramp. See Fig. 6(a)....
-
11B-608.2.1 Transfer type shower compartments
Transfer type shower compartments shall be 36 inches (914 mm) by 36 inches (914 mm) clear inside dimensions measured at the center points of opposing sides and shall have a 36 inch (914...
-
11B-809.2.2 Turning space
For example, in kitchens, Section 11B-804.3.1 requires at least one work surface with clear floor space complying with Section 11B-306 to be centered beneath....