Recommendation:Operable parts approximately centered on the clear floor space are generally easier to reach....
Search Results "IDeA Center"
-
Clear Floor Space [4.27.2]
-
407.12.2 Side Reach
The vertical reference plane shall be centered on the operable part and placed at the leading edge of the maximum protrusion of the ICT within the length of the vertical reference plane....
-
A4.13.9 DOOR HARDWARE
To be effective, they should cover the door width, less approximately 2 in (51 mm), up to a height of 16 in (405 mm) form its bottom edge and be centered across the top....
-
608.2.2 Standard Roll-In Type Shower Compartments
Standard roll-in type shower compartments shall be 30 inches (760 mm) wide minimum by 60 inches (1525 mm) deep minimum clear inside dimensions measured at center points of opposing sides...
- Center for Independence - Grand Junction, Carbondale, Montrose, CO
- Independent Living Center of Kern County - Bakersfield, CA
-
III−1.6000 Private clubs
ILLUSTRATION: A private country club that would be considered a "private club" for ADA purposes rents space to a private day care center that is also open to the children of nonmembers....
-
II. MODEL FACILITIES
Kaiser will designate the Kaiser Permanente Medical Center in San Francisco, California and the Kaiser Permanente Medical Center in Riverside, California as "Model Facilities."...
- disABILITY Resource Center (dRC) - Knoxville, TN
- North Country Center for Independence (NCCI) - Plattsburgh, NY
-
III. FACILITIES COVERED BY THIS CONSENT DECREE
registration desk, the lobby, the public telephones, the public and employee restrooms, the elevators, the units, sleeping rooms and suites, the parking garages, restaurants, bars, spa, fitness center...
-
12.1 Q...How is the individual building test performed for additional stories, to determine if those stories must also be treated as ground floors?
determining whether a non-elevator building has more than one ground floor, the point of measurement for additional ground floors, after the first ground floor has been established, is at the center...
-
7(2)(b)(iv)
In locations where toilets are adjacent to walls or bathtubs, the center line of the fixture is a minimum of 1'6" from the obstacle....
-
11B-503.3.3 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface....
-
12183(b) Elevator
be construed to require the installation of an elevator for facilities that are less than three stories or have less than 3,000 square feet per story unless the building is a shopping center...
-
1134A.8, Item 4.3
The knee and toe space shall be centered on the fixture, and shall comply with Section 1138A.2....
-
A4.13.9 Door Hardware
To be effective, they should cover the door width, less approximately 2 in (51 mm), up to a height of 16 in (405 mm) from its bottom edge and be centered across the width of the door....
-
Side Approach
Recommendation: The clear floor space should be centered on the ATM unit....
-
1134A.8, Item 4.3
The knee and toe space shall be centered on the fixture, and shall comply with Section 1138A.2....
-
11B-608.2.3 Alternate roll-in type shower compartments
Alternate roll-in type shower compartments shall be 36 inches (914 mm) wide and 60 inches (1524 mm) deep minimum clear inside dimensions measured at center points of opposing sides....
- National Aging and Disability Transportation Center (NADTC)
-
D. Examples of Schools to Which These Guidelines Apply
Note: Subsequent sections of these Guidelines may use the term secondary vocational education center in referring to the institutions described in paragraphs 3, 4 and 5 above or the term...
-
APPENDIX RESOURCES FOR LOCATING REASONABLE ACCOMMODATIONS
Equal Employment Opportunity Commission 1-800-669-3362 (Voice) 1-800-800-3302 (TT) The EEOC's Publication Center has many free documents on the Title I employment provisions of the...
-
III. Enforcement and Implementation
If the United States believes that any of the XL Center Parties has failed to comply in a timely manner with any requirement of this Agreement without obtaining sufficient advance...