Legal standard for other power-driven mobility devices....
Search Results "Transfer Device (Amusement Rides)"
-
Legal standard for other power-driven mobility devices. (Section-by-Section Analysis)
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface....
-
Use of Segways® and Similar Devices by Individuals with a Mobility Impairment in GSA-Controlled Federal Facilities
Policy Summary: The General Services Administration (GSA) recognizes that some persons with mobility impairments are utilizing the Segway® Personal Transporter (Segway) and similar devices...
-
Wheelchairs
Wheelchairs Carriers must permit storage in the cabin of wheelchairs or components of wheelchairs, including folding, collapsible, or breakdown battery-powered wheelchairs [Sec....
-
Battery-powered Wheelchairs
Battery-powered Wheelchairs Carriers must accept a passenger’s battery-powered wheelchair, including the battery, as checked baggage unless baggage compartment size and aircraft...
-
9. When ramp access is provided to one side of a crawl tube and the other side is only entered by transfer access, how is it counted (ramp or transfer access play component)?
When ramp access is provided to one side of a crawl tube and the other side is only entered by transfer access, how is it counted (ramp or transfer access play component)?...
-
Communication / Devices / Equipment / Other
I use a (word board, speech generating device, augmentative communication device, etc.) to communicate. In an emergency, I can point to words and letters. I cannot read....
-
§301(7)(I)
A park, zoo, amusement park, or other place of recreation;...
-
4.10.6* Door Protective and Reopening Device
They shall be provided with a reopening device that will stop and reopen a car door and hoistway door automatically if the door becomes obstructed by an object or person....
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum....
-
RECOMMENDED CHANGE
ANSI/AAMI ES60601-1:2005, which is the safety standard most commonly used by medical devices, requires a similar instability test in section 9.4.2.3: ME EQUIPMENT having a mass of 25...
-
Section 1.0 Background
accommodate the use of such devices, which are generally larger, heavier, and less finely maneuverable than manual wheelchairs....
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side....
-
§382.129 What other requirements apply when passengers' wheelchairs, other mobility aids, and other assistive devices must be disassembled for stowage?
[See subsections ...]
-
Whether the definition of "wheelchair'' includes the Segway® PT. (Section-by-Section Analysis)
area; amusement parks expressed concern that rides have been designed, purchased, and installed to enable wheelchair users to transfer easily or to accommodate wheelchairs on the ride itself...
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer surfaces....
-
§382.131 Do baggage liability limits apply to mobility aids and other assistive devices?
With respect to transportation to which 14 CFR part 254 applies, the limits to liability for loss, damage, or delay concerning wheelchairs or other assistive devices provided in part 254...
- Mobile Phone Sensor (BE9250/BE9251)
-
11B-1008.3.2.4 Contrasting stripe
Striping complying with Section 11B-504.4.1 shall be provided at each transfer step. FIGURE 11B-1008.3.2 TRANSFER STEPS...
-
Key Study findings:
wouldn’t attempt to transfer at all and 3 of which attempted the transfer but failed in the process). ...
-
Backrests
Backrests: The backrest design for platform 1, the first surface that participants transferred to from their WMD as seen in Table 2, was based on bench seat back supports in section 903.5...
-
M305.2.2 Structural Strength
Transfer supports and their connections shall be capable of resisting vertical and horizontal forces of 250 pounds (1,112 N) applied at all points on the transfer support....
-
§ 38.23(d)(1) Design load
(1) Design load. Securement systems on vehicles with GVWRs of 30,000 pounds or above, and their attachments to such vehicles, shall restrain a force in the forward longitudinal...
- Human Engineering Research Laboratories (HERL) PneuMobility