Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
Search Results "Slope Meter"
-
11B-809.8.1 Door Thresholds
-
11B-1010.1 Turning space
A circular turning space 60 inches (1524 mm) diameter minimum with slopes not steeper than 1:48 shall be provided at shooting facilities with firing positions....
-
Accessible Route to Dumpster and Enclosure
For general understanding, site-specific information such as grading, slopes and cross-slopes are not included in a prototype design and thus, the design concept for all exterior elements...
-
11B-1007.3.1 Start of play
A clear floor or ground space 48 inches (1219 mm) minimum by 60 inches (1524 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
Start of Play: ADA Standard Section 1007.3.1
A clear floor or ground space 48 inches (1220 mm) minimum by 60 inches (1525 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
11B-1007.3.1 Start of play
A clear floor or ground space 48 inches (1219 mm) minimum by 60 inches (1524 mm) minimum with slopes not steeper than 1:48 shall be provided at the start of play....
-
2. Electronic (Digital) Level
Even experts can misjudge how steep a running slope or cross slope is if they do not use a level....
-
OBJECTIVES
provide access to pedestrians, roundabouts crosswalks have been signalized where heavy pedestrian flow would otherwise cause long vehicle delays, where unbalanced traffic volumes require metering...
-
2.1.2 Standards
In ensuring that the prescribed magnetic field goals are achieved, the utilization of a "magnetic field-strength" meter is assumed (see figure 3)....
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum....
-
11B-406.3.2 Turning space
The slope of the turning space in all directions shall be 1:48 maximum....
-
SIGNALIZATION OF ROUNDABOUTS
Metering is the installation of a signal at entry yield lines. The principle and operation is the same as for meters that many jurisdictions use to meter freeway on-ramps....
-
11B-604.5.1 Side wall
(2) Bath stations in shower stalls and tubs shall be located 5 to 6 feet (1.52 to 1.83 meters) above the floor, within normal view of the user and within reach...
-
ALUMAT Magnetic Doors Seals for External Doors
The magnetic double door rail is certified according to DIN 18055 for a floor-to-floor height of up to 100 meters against driving rain and permeability of joints....
-
M303.3.3 Ramped (Section-by-Section Analysis)
, cross slope, clear width, edge protection, and handrails....
-
11B-406.5.6 Grade breaks
Surface slopes that meet at grade breaks shall be flush....
-
11B-406.5.6 Grade breaks
Surface slopes that meet at grade breaks shall be flush....
-
11B-812.3 Floor or ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted....
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
11B-812.3 Floor or ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted....
-
11B-608.9 Shower floor or ground surface
Floor or ground surfaces of showers shall comply with Section 11B-302.1 and shall be sloped 1:48 maximum in any direction....
-
Technical Requirements [1018 and 1018.1, Exception 3]
The technical requirements for beach access routes include specific provisions for connections, the surface, clear width, obstacles, openings, running slope, cross slope, resting intervals...
-
Seat Location: ADA Standard Section 1009.2.2
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
-
11B-1009.2.2 Seat location
The deck surface between the centerline of the seat and the pool edge shall have a slope not steeper than 1:48....
