When the caster is released, the spring load gauge replicates the force of an individual in a wheelchair over a given surface....
Search Results "Hybrid Surface System"
-
Rotational Penetrometer
-
(3) Adjustability: Transfer Surface Intermediate Heights
In the MDE NPRM there was no requirement for the transfer surface to have intermediate transfer heights....
-
3. Ground and floor surface treatments
Ground and floor surface treatments 4.5 Accessible routes, and spaces, including floors, walks, ramps, stairs, and curb ramps....
-
Public Address Systems
Where public address systems are provided in transportation facilities to convey public information, a means of conveying the same or equivalent information to persons who are deaf or hard...
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951....
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951....
-
4. Assess During the Planning, Installation and Maintenance Phases
Assess During the Planning, Installation and Maintenance Phases Once the playground surface is installed, an on-site inspection of the surface system should be conducted along the accessible...
-
11B-203.9 Employee workstations
workstations shall only be required to comply with Sections 11B-206.2.8 _|Accessible Routes; Employee Work Areas|_, 11B-207.1 _|Accessible Means of Egress; General|_, 11B-215.3 _|Fire Alarm Systems...
-
High work surface
All of the seating spaces/work surfaces were approximately 42" high....
-
Openings [§302.3]
Openings [§302.3] Openings in ground and floor surfaces, such as grates, are limited in width to prevent passage of a ½” diameter sphere....
-
1011.2.2 Surface
The surface of the clear ground space shall be firm and stable....
-
1011.2.2 Surface
The surface of the clear ground space shall be firm and stable....
-
National Restaurant Association - Americans with Disabilities Act Toolkit
Americans with Disabilities Act rules have changed. Make sure you're in full compliance with the latest ADA accessibility standards, whether you're building a new restaurant,...
-
Scoping [4.1.2(4), 4.1.3(3)]
Requirements in 4.5 apply to accessible routes and spaces, including ramps, elevators, platform lifts, and clear floor space. These requirements apply to interior and exterior...
-
Audible and Visual Indicators: ADA Standard Section 708.2
The system shall provide both audible and visual signals. Advisory 708.2 Audible and Visual Indicators. A light can be used to indicate visually that assistance is on the way....
-
Shredded Rubber
The surface material used as a play safety surface has gained some popularity as a means to reuse tires. ...
-
1014.3.2 Slope
The slope of the floor surface shall not be steeper than 1:48 in any direction....
-
1014.3.2 Slope
The slope of the floor surface shall not be steeper than 1:48 in any direction....
-
11B-504.4 Tread surface
Stair treads shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted. Exception: Reserved.
-
4.3.5 Transfer Height
Tent platform surfaces that are not the same elevation as the ORAR shall be between 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the floor or ground surface adjacent to...
-
11B-708.2 Audible and visual indicators
The system shall provide both audible and visual signals. Advisory 11B-708.2 Audible and visual indicators. A light can be used to indicate visually that assistance is on the way....
-
11B-708.2 Audible and visual indicators
The system shall provide both audible and visual signals. Advisory 11B-708.2 Audible and visual indicators. A light can be used to indicate visually that assistance is on the way....
-
Handrail Requirements
The proposed rule specified that gripping surfaces be continuous and unobstructed by elements, including newel posts (505.6)....
-
Inpro Corporation JointMaster® 806 Series Floor Expansion Joint Covers
The pre-drilled counter-sunk holes on the 806 series system allow for easy installation....
