The Department of Justice ADA regulations provide additional guidance regarding the relationship between these requirements and elements that are not part of the built environment....
Search Results "Built-In Table"
Filters
Commonly Searched Documents
-
11B-206.2.8 Employee work areas
-
1. Public Rights-of-Way
Title II of the ADA applies to state and local government facilities, and the ABA requires that buildings or facilities that were designed, built, or altered with federal dollars or leased...
-
M15
Are all built-in dispensers, receptacles, or equipment mounted so the front does not extend more than 4 inches from the wall if the bottom edge is between 27 inches and 80 inches above the...
-
H14
Are all built-in dispensers, receptacles, or equipment mounted so the front does not extend more than 4 inches from the wall if the bottom edge is between 27 inches and 80 inches above the...
-
Ticket pricing. (Section-by-Section Analysis)
For example, many theaters built prior to the passage of the ADA have balconies that are inaccessible to individuals who use wheelchairs, and the only wheelchair spaces are located in the...
-
1. Desk size
Desk size: If provided, the writing surface of desks and writing tables is no higher than 34 inches....
-
5.4.2.2 Transfer and Positioning Support Length Recommendations for Imaging Equipment with Transfer Surfaces
Rational for the recommendation A transfer support (for transfer surfaces less than or equal to 24” deep) is to extend horizontally along the side of the patient scanning/imaging table...
-
Swinging Doors and Gates: ADA Standard Section 404.2.4.1
Section 404.2.4.1 covers the current ADA Standards for maneuvering clearances at swinging doors and gates.
-
11B-208.2 Minimum number
Parking spaces complying with Section 11B-502 shall be provided in accordance with Table 11B-208.2 except as required by Sections 11B-208.2.1, 11B-208.2.2, and 11B-208.2.3....
-
Introduction
Introduction The Tables & Chairs Subcommittee met six times via conference call....
-
11B-407.4.7.2 Keypads
The dot shall be 0.118 inch (3 mm) to 0.120 inch (3.05 mm) base diameter and in other aspects comply with Table 11B-703.3.1....
-
11B-208.2.3.1 Parking for residents
Where fewer than one parking space is provided for each residential dwelling unit, parking spaces complying with Section 11B-502 shall be provided in accordance with Table 11B-208.2....
-
§ 36.406(b) Application of proposed standards
(b) The proposed standards apply to fixed or built-in elements of buildings, structures, site improvements, and pedestrian routes or vehicular ways located on a site. ...
-
1.1.3.2, Item 7
Hotels, motels, lodging houses, apartment houses, dwellings, dormitories, condominiums, shelters for homeless persons, congregate residences, employee housing, factory-built housing and...
-
106.5.78 Work Area Equipment
As used in this document, this term shall apply only to equipment that is permanently installed or built-in in employee work areas....
-
Scoping [4.1.3(19)]
Scoping [4.1.3(19)] Requirements for accessible seating and permanent assistive listening systems apply where seating is fixed or built-in....
-
Kohler Dynametric® 60" x 32" alcove bath with left-hand drain
See how durable KOHLER® Enameled Cast Iron has been crafted for over 100 years, built to last for generations....
-
BlueDAG App
ADA standards built in - BlueDAG is mobile, tablet and web ready. BlueDAG includes all of the standard checklists and findings for a site, making it perfect for any site and inspector....
-
11B-224.2 Guest rooms with mobility features
In transient lodging facilities, guest rooms with mobility features complying with Section 11B-806.2 shall be provided in accordance with Table 11B-224.2, as follows....
-
11B-224.2 Guest rooms with mobility features
In transient lodging facilities, guest rooms with mobility features complying with Section 11B-806.2 shall be provided in accordance with Table 11B-224.2, as follows....
-
11B-805.4.3 Turning space
/14, which includes the following interpretation of Subsections 11B-805.4.1, 11B-805.4.2 and 11B-805.4.3: All patient care areas must provide access to the area and to the bed, exam table...
-
ADOPTION OF A 19 INCH HEIGHT MINIMIZES COSTS TO HEALTH CARE PROVIDERS
transfer surface height maximum of 19 inches, information related to costs is especially critical to take into account in determining the minimum standard height for medical examination tables...
-
11B-813.2.12 Signs
An informational sign complying with Section 11B-216 shall be provided within adult changing facilities and in close proximity to the changing table....
-
6. Grab Bars
(Note: in tubs with built-in seats at the head of the tub, this grab bar is not required.)...
