Landings subject to wet conditions shall be designed to prevent the accumulation of water....
Search Results "Shall"
-
405.10 Wet Conditions
-
306.3.5 Width
Knee clearance shall be 30 inches (760 mm) wide minimum....
-
306.2.5 Width
Toe clearance shall be 30 inches (760 mm) wide minimum....
-
1012.4 Surface
The surface of parking spaces and pull-up spaces shall be firm and stable....
-
4.31.6 CONTROLS
Telephones shall have pushbutton controls where service for such equipment is available....
-
4.23.6 LAVATORIES AND MIRRORS
If lavatories and mirrors are provided, then at least one of each shall comply with 4.19....
-
4.19.1 GENERAL
The requirements of 4.19 shall apply to lavatory fixtures, vanities, and built-in lavatories....
-
4.20.2 FLOOR SPACE
Clear floor space in front of bathtubs shall be as shown in Fig. 33....
-
4.27.1 GENERAL
Controls and operating mechanisms required to be accessible by 4.1 shall comply with 4.27....
-
4.33.1 MINIMUM NUMBER
Assembly and associated areas required to be accessible by 4.1 shall comply with 4.33....
-
4.1.2(2)
(2) All objects that overhang circulation paths shall comply with 4.4....
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48....
-
1015.4 Turning Space
A turning space complying with 304.3 shall be provided within viewing areas....
-
1015.5 Surface
The surface of clear ground spaces and turning spaces shall be firm and stable....
-
M303.1 General
Diagnostic equipment used by patients seated in a wheelchair shall comply with M303....
-
1018.3 Surface
The surface of beach access routes and resting intervals shall be firm and stable....
-
M304.1 General
Diagnostic equipment used by patients in a standing position shall comply with M304....
-
M303.2.2 Width
Wheelchair spaces shall be 36 inches (915 mm) wide minimum....
-
1014.2.2.2 Turning Space
A turning space complying with 304.3 shall be provided within the camp shelter....
-
11B-404.3.7 Revolving doors, revolving gates, and turnstiles
Revolving doors, revolving gates, and turnstiles shall not be part of an accessible route....
-
11B-404.2.8 Closing speed
Door and gate closing speed shall comply with Section 11B-404.2.8....
-
11B-411.4.2 Floor surfaces
Floor surfaces in elevator cars shall comply with Section 11B-407.4.2....
-
11B-409.4.6.1 Size
Control buttons shall be ¾ inch (19.1 mm) minimum in their smallest dimension....
-
11B-409.4.7.4 Cord
The telephone cord shall be 29 inches (737 mm) long minimum....