All walks, halls, corridors, aisles, and other spaces that are part of an accessible route shall comply with 4.3....
Search Results "Shall"
Filters
Commonly Searched Documents
-
4.3.1* GENERAL
-
4.34.2(2)
(2) Accessible spaces shall have maneuvering space complying with 4.2.2 and 4.2.3 and surfaces complying with 4.5....
-
4.1.2(3)
(3) Ground and floor surfaces along accessible routes and in accessible rooms and spaces shall comply with 4.5....
-
4.1.5 ACCESSIBLE BUILDINGS: ADDITIONS
Each addition to an existing building shall comply with 4.1.1 to 4.1.4 of 4.1, Minimum Requirements, except as follows:...
-
4.25.1 GENERAL
Fixed storage facilities such as cabinets, shelves, closets, and drawers required to be accessible by 4.1 shall comply with 4.25....
-
4.25.4 HARDWARE
Hardware for accessible storage facilities shall comply with 4.27.4. Touch latches and U-shaped pulls are acceptable....
-
4.29.7* STANDARDIZATION
Textured surfaces for tactile door warnings shall be standard within a building, facility, site, or complex of buildings....
-
4.34.6.5(4)
(4) Faucets shall comply with 4.27.4. Lever-operated or push-type mechanisms are two acceptable designs....
-
6.3(1)
(1) Each bedroom shall have a turning space that complies with 4.2.3, and preferably that is located near the entrance....
-
4.33.2* SIZE OF WHEELCHAIR LOCATIONS
Each wheelchair location shall provide minimum clear ground or floor spaces as shown in Fig. 46....
-
4.16.1 GENERAL
Accessible water closets shall comply with 4.16. For water closets in accessible dwelling units, see 4.34.5.2....
-
1018.8.1 Size
Resting intervals shall be 60 inches minimum (1525 mm) by 60 inches (1525 mm) minimum....
-
M303.3.3.5 Handrails
Ramps with a rise greater than 6 inches (150 mm) shall provide handrails on each side....
-
M301.1 General
Where diagnostic equipment is used by patients in a supine, prone, or side-lying position, it shall comply with M301....
-
11B-404.2 Manual doors, doorways, and manual gates
Manual doors and doorways and manual gates intended for user passage shall comply with Section 11B-404.2....
-
11B-411.2.1.7 Elevator car assignment
When the accessibility function button is pressed, elevator car assignment shall comply with Section 11B-411.2.1.7....
-
11B-411.2.1.3.3 Proximity of required elements
Required features shall be provided on a hall call console assembly or as individual elements grouped in close proximity....
-
11B-411.4.1 Car dimensions
Inside dimensions of elevator cars and clear width of elevator doors shall comply with Section 11B-407.4.1....
-
11B-411.2.1.4 Additional features
Hall call console additional features, if provided, shall comply with Sections 11B-309 and 11B-411.2.1.4....
-
11B-901.1 Scope
The provisions of Division 9 shall apply where required by Division 2 or where referenced by a requirement in this chapter....
-
11B-1005.5 Turning space
At least one turning space complying with Section 11B-304.3 shall be provided on fishing piers and platforms....
-
§1193.41 Input, control, and mechanical functions.
Input, control, and mechanical functions shall be locatable, identifiable, and operable in accordance with each of the following, assessed independently:...
-
§ 35.160(c)(2)
(2) A public entity shall not rely on an adult accompanying an individual with a disability to interpret or facilitate communication except—...
-
1133A.7 Knee and toe space
Knee and toe space, when required by Section 1133A, shall comply with Section 1138A.2 and the following:...