Objects with leading edges more than 27 inches (686 mm) and not more than 80 inches (2032 mm) above the finish floor or ground shall protrude 4 inches (102 mm) maximum horizontally into...
Search Results "Urinal Clear Floor Space"
-
11B-307.2 Protrusion limits
-
307.2 Protrusion Limits
Objects with leading edges more than 27 inches (685 mm) and not more than 80 inches (2030 mm) above the finish floor or ground shall protrude 4 inches (100 mm) maximum horizontally into...
-
Elevator Exemption
The 500 square foot maximum was based on a floor area allowance of 100 square feet per occupant, which is consistent with model building code requirements for business and industrial occupancies...
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2....
-
Why are surface characteristics specified?
Findings from this limited human-subject testing confirmed that individuals who have gait and mobility disabilities make greater demands on the walking surfaces of floors, ramps, and walkways...
-
Addendum G: Comparison of Transfer Abilities between Men and Women
The average wheelchair seat to floor height for men was 22.2 (±1.44) inches and the average height for women was 21.65 (±1.31) inches....
-
Section 2. Definitions
New terms defined in the final Guidelines include: "adaptable," "assistive device," "ground floor," "loft," "multistory dwelling unit," "single-story dwelling unit," and "story"....
-
610.3 Shower Compartment Seats
The top of the seat shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor. Seats shall comply with 610.3.1 or 610.3.2. ...
-
407.12.2.1 Unobstructed Side Reach (Section-by-Section Analysis)
proposes that, where the operable part is located 10 inches or less behind the vertical reference plane, the operable part must be 48 inches high maximum and 15 inches high minimum above the floor...
-
11B-704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
-
11B-704.4.1 Height
When in use, the touch surface of TTY keypads shall be 34 inches (864 mm) minimum above the finish floor....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
What surface characteristics are required of an accessible route?
The Americans with Disabilities Act Accessibility Guidelines (ADAAG) requires only that newly-constructed or altered ground and floor surfaces of accessible routes on sites and in buildings...
- Steelcase Ology Series Height-Adjustable Table
- Norton 6000 Series Low Energy Operator
-
Usable (Section-by-Section Analysis)
Something can be accessible but not usable: a door can be built to correct specifications, with proper maneuvering space, but space can be blocked by furniture or otherwise be made unusable...
-
Introduction
ADA requirements for new construction and alterations include detailed provisions for elements, spaces, and facilities....
-
19 Inch Low Height
However, as the images below make clear, the seat reference plane and effective seat depth will dictate the difference between the seat surface height at the front edge and the height of...
-
Family members and friends as interpreters. (Section-by-Section Analysis)
Section 36.303(c)(2), which was proposed in the NPRM, has been included in the final rule to make clear that a public accommodation shall not require an individual with a disability to bring...
-
Are there good examples of Title III Compliance for making goods and services accessible?
This answer was so common that it seemed clear to me that it had been professionally coached. I also know that the answer is not altogether correct....
-
11B-810.4 Bus signs
shall comply with Sections 11B-703.5.1 _|Finish and Contrast|_ through 11B-703.5.4 _|Character Proportions|_, and Sections 11B-703.5.7 _|Stroke Thickness|_ and 11B- 703.5.8 _|Character Spacing...
-
F208.2.1 Hospital Outpatient Facilities
Ten percent of patient and visitor parking spaces provided to serve hospital outpatient facilities shall comply with 502. Advisory F208.2.1 Hospital Outpatient Facilities....
-
R305.1.1 Dome Size
Where the truncated domes are arrayed radially, they may differ in diameter and center-to-center spacing within the ranges specified in R305.1.1 and R305.1.2....
-
208.2.1 Hospital Outpatient Facilities
Ten percent of patient and visitor parking spaces provided to serve hospital outpatient facilities shall comply with 502. Advisory 208.2.1 Hospital Outpatient Facilities....