must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
Search Results "Clear Floor Area"
-
Accessible Routes
-
806.2.4 Toilet and Bathing Facilities
Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
-
806.2.4 Toilet and Bathing Facilities
Toilet and bathing fixtures required to comply with 603 through 610 shall be permitted to be located in more than one toilet or bathing area, provided that travel between fixtures does not...
-
Accessible Rides
must provide at least one wheelchair space, or at least one ride seat designed for transfer, or a transfer device designed to transfer a person using a wheelchair from the load and unload area...
-
5.2.2 Transfer Surface Size Recommendations for M302
Depending on the configuration of the equipment, the transfer surface may coincide with the seat area of an examination chair....
-
§ 36.302(f)(9)(i)
For accessible seating in a designated wheelchair area, a public accommodation shall provide up to three companion seats for each person with a disability who requires a wheelchair space...
-
505.10 Handrail Extensions
In assembly areas, extensions shall not be required for ramp handrails in aisles serving seating where the handrails are discontinuous to provide access to seating and to permit crossovers...
-
§ 35.138(i)(1)
For accessible seating in a designated wheelchair area, a public entity shall provide up to three companion seats for each person with a disability who requires a wheelchair space, provided...
-
Accessible Routes to Programs and Services
The accessible route should be the same, or be located in the same area as, the general route used by people without mobility disabilities....
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4....
-
Vertical Clearance [4.6.5]
Recommendation: Directional signage, including that at entrances, can be very helpful, especially where van spaces are located in one area only....
-
Angled (Front-In) Parking
Recommendation: Where possible, locate accessible spaces in areas where drivers have the option of backing in or consider providing an access aisle at each space so that in series an aisle...
-
A trailhead
is a site designed and developed by the Forest Service or other Government agency, a trail association, trail maintaining club, trail partner, or other cooperators to provide a staging area...
-
Costs of Speech-To-Text Services
The skill and availability of service providers and the area where the meeting will be held can all affect the rates for these services....
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4.◼...
-
1.1.3 Scope
In alteration projects, these provisions apply to the area of new work, and include the path of travel requirements found in Section 11B-202.4. ◼...
-
Operable Parts of Windows
Scoping provisions in 203.9 exempt employee work areas from the guidelines except for requirements concerning accessible routes, circulation paths, and wiring for visual alarms....
-
11B-234.3 Minimum number
These rides are not exempt from the other provisions in 234 requiring an accessible route to the load and unload areas and to the ride....
-
232 Detention Facilities and Correctional Facilities
Detention Facilities and Correctional Facilities Section 232 of the 2010 Standards establishes requirements for the design and construction of cells, medical care facilities, and visiting areas...
-
11B-223.1 General
lack of a design requirement does not mean that covered entities are not required to provide services to people with disabilities where accessible rooms are not dispersed in specialty areas...
-
F234.1 General
Where amusement rides are moved after several seasons to another area of the park or to another park, the ride would not be considered newly designed or newly constructed....
-
When Transfer Systems Are Used
At least 50 percent of the elevated play components can be connected by a transfer system in play areas with fewer than 20 elevated components....
-
223.1 General
lack of a design requirement does not mean that covered entities are not required to provide services to people with disabilities where accessible rooms are not dispersed in specialty areas...