surface was compared to the work required to propel up or through a turn on various ramp angles in order to relate the work required for the surface to ADAAG specifications for “sufficiently accessible...
Search Results "TAS: Texas Accessibility Standards"
-
RESULTS OF OBJECTIVE SURFACE MEASUREMENT
-
III-3.4200 Right to participate in the regular program
The requirements for providing access to the regular program still apply....
-
Transfer Surface Size: Equipment Used by Patients in a Seated Position (M302.2.2)
The 21 inches minimum width is based on the ideal chair width recommended in Architectural Graphic Standards for auditorium seating....
-
CHAPTER 2 DEFINITIONS
ETA Editor's Note Sections from California Building Code Chapter 2 not adopted by Division of the State Architect - Access Compliance (DSA-AC) omitted. ...
-
11B-706.1 General
[2010 ADA Standards] 706.1 General. Assistive listening systems required in assembly areas shall comply with 706. Advisory 11B-706.1 General....
-
Companion Seats
Section 4.33.3 of the 1991 Standards required at least one fixed companion seat to be provided next to each wheelchair space....
-
Power-Operated Doors or Gates
Comments noted that since the ASME/ANSI A18.1 standard requires such doors and gates to be self-closing, the specification in the rule was redundant. Response....
-
C. Functional Performance Criteria
Both the existing 508 Standards and 255 Guidelines provide functional performance criteria....
-
410.5 Digital Encoding of Speech (Section-by-Section Analysis)
This section proposes to require ICT with two-way voice communication to transmit and receive digitally encoded speech in the manner specified by ITU-T Recommendation G.722, a consensus standard...
-
A4.30.4 RAISED OR INDENTED CHARACTERS OR SYMBOLS
Braille characters can be used in addition to standard alphabet characters and numbers....
-
Yale 6400LN Series Grade 1 Cylindrical Locks
ADA: The 6400LN meets accessibility guidelines of the Americans with Disabilities Act and the requirements of the Uniform Federal Accessibility Standards and ANSI 117.1, all requiring ease...
-
11B-605.4 Flush controls
[2010 ADA Standards] 605.4 Flush Controls. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309....
-
11B-1009.2.6 Footrests and armrests
[2010 ADA Standards] 1009.2.6 Footrests and Armrests. Footrests shall be provided and shall move with the seat....
-
11B-406.5.8 Counter slope
[2010 ADA Standards] 406.2 Counter Slope. Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20....
-
11B-405.9.2 Curb or barrier
ETA Editor's Note CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the extended floor or ground surface also permitted by 2010 ADA Standards...
-
11B-405.9.2 Curb or barrier
ETA Editor's Note CBC requires either a curb or a barrier for edge protection at ramps, and does not recognize the extended floor or ground surface also permitted by 2010 ADA Standards...
-
11B-605.4 Flush controls
[2010 ADA Standards] 605.4 Flush Controls. Flush controls shall be hand operated or automatic. Hand operated flush controls shall comply with 309....
-
11B-406.5.8 Counter slope
[2010 ADA Standards] 406.2 Counter Slope. Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20....
-
11B-1009.2.6 Footrests and armrests
[2010 ADA Standards] 1009.2.6 Footrests and Armrests. Footrests shall be provided and shall move with the seat....
-
§ 36.406(e) Housing at a place of education.
Housing at a place of education that is subject to this section shall comply with the provisions of the 2010 Standards applicable to transient lodging, including, but not limited to, the...
-
410 Platform Lifts
This section has been updated to reference the new ASME A18.1 Safety Standard for Platform Lifts and Stairway Chairlifts (410.1)....
-
Main Lobby
See Standards § 7.2(1). j....
-
Section 35.151(i) Curb Ramps (Section-by-Section Analysis)
Both the 1991 Standards and the proposed standards provide technical guidance for the installation of curb ramps....
-
C101.3 Conventional Industry Tolerances (Section-by-Section Analysis)
C101.3 Conventional Industry Tolerances (Section-by-Section Analysis) This proposed section, which has a parallel provision in the proposed 508 Standards (E101.3), would provide that...
