(2) Ramp surface....
Search Results "Tread Surface"
Filters
Commonly Searched Documents
-
§ 38.83(c)(2) Ramp surface
-
Tile Tech Pavers® Coral-Pave™
Its irregular surface texture, defined in luxurious detail, was developed from actual sections of fossilized coral....
-
5.2.3 Transfer Surface Measurement
5.2.3 Transfer Surface Measurement. The transfer surface should be measured from the center-point of each side of the transfer surface....
-
4.1.2(4)
(4) Ground surfaces along accessible routes and in accessible spaces shall comply with 4.5....
-
4.9.4(4)
(4) Gripping surfaces shall be uninterrupted by newel posts, other construction elements, or obstructions....
-
4.1.1(4)
(4) Ground surfaces along accessible routes and in accessible spaces shall comply with 4.5....
-
§ 38.125(c)(2) Ramp surface
(2) Ramp surface....
-
11B-505.4 Height
Top of gripping surfaces of handrails shall be 34 inches (864 mm) minimum and 38 inches (965 mm) maximum vertically above walking surfaces, stair nosings, and ramp surfaces....
-
Allen Face F-Meter® Rolling Floor Profiler
The F-Meter® is the finest floor profiling instrument ever made. Pulled manually across the floor, the F-Meter® can measure up to 2500 linear feet (5,000 point elevation readings!)...
-
Inpro Corporation IPC® Designer Kickplates Models 10 & 20
Requires the Premium User plan or above. (Login or upgrade your account!) -
Segno ADA Table #3521
Requires the Premium User plan or above. (Login or upgrade your account!) -
Is color contrast required for stair nosings?
Visual contrast on stair nosings or the leading edges of treads is helpful for people with low vision, but it is not required by the Standards except at escalators in rail and fixed guideway...
-
1005.3.2 Extended Ground or Deck Surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
-
Slope
The 2010 Standards provide, at section 403.3, that the cross slope of walking surfaces not be steeper than 1:48....
-
Tile Tech Pavers® IPE Deck Tiles
IPE Deck Tiles are designed for constructing raised wood decks over exterior surfaces such as rooftops, terraces and plazas, in both residential and commercial applications....
-
3. Review the Research Findings About Accessibility Issues for Play Surfaces
study on the accessibility of playground surfaces....
-
7.4.8 Protruding Objects
Constructed features, including signs, shall not extend into the trail tread more than 4 inches (100 mm) between 27 inches (685 mm) and 80 inches (2030 mm) above the surface of the trail...
-
5.2.2.1 Transfer Surface Width Recommendations for M302
5.2.2.1 Transfer Surface Width Recommendations for M302 The Committee recommends 21 inches for the minimum width of the transfer surface of examination chairs and other equipment primarily...
-
502.4 Floor or Ground Surfaces
502.4 Floor or Ground Surfaces. Parking spaces and access aisles serving them shall comply with 302. Access aisles shall be at the same level as the parking spaces they serve....
-
Filter Pave™ Porous Paving for Stormwater Management Informational Video
Filter Pave™ Porous Paving for Stormwater Management Informational Video
-
1.2.2
1.2.2 When flatness of running slope for an accessible surface other than a ramp is measured according to Section 1.1.5 no more than 20% (rounded to the nearest whole number) of the measurements...
-
Tile Tech Pavers® Oceanic™ Series - Wave-Pave™
pavers can also be manufactured with various design mixes such as crushed seashells, granite chips and recycled glass which are then honed and shot blasted for a unique and slip resistant surface...
-
1005.3.2 Extended Ground or Deck Surface
The ground or deck surface shall extend 12 inches (305 mm) minimum beyond the inside face of the railing....
