In residential dwelling units, grab bars shall not be required to be installed in toilet or bathrooms provided that reinforcement has been installed in walls and located so as to permit...
Search Results "Residential Dwelling Unit for Sale"
Filters
Commonly Searched Documents
-
11B-604.5 Grab bars
-
Parking at Residential Facilities
Parking at residential facilities is addressed in section 208.2.3....
-
VI. Relationship to Other Laws
with certain features of accessible design.22 The FHAct design and construction requirements apply to ‘‘covered multifamily dwellings’’ designed and constructed for first occupancy after...
-
11B-809.9.1 Clear floor space
Clear floor spaces 30 inches (762 mm) by 48 inches (1219 mm), with centerlines aligned with the centerline of the work surface, appliance, sink or fixture, shall be provided in the...
-
11B-809.10.4 Sufficient maneuvering space
Where doors swing into the toilet and bathing or powder rooms required to comply with Section 11B-809.10, a clear maneuvering space of 30 (762 mm) inches by 48 inches (1219 mm)...
-
Doors in a Series
Doors in a series are not typically part of an individual dwelling unit. Doors in a series generally are used in the entries to buildings, and are therefore part of public spaces....
-
11B-203.8 Residential facilities
11B-203.8 Residential facilities....
-
T-turn Maneuvering Space
The Guidelines adequately address the accessible route into and through the dwelling unit by the minimum corridor width and door width specifications, given typical apartment layouts....
-
Section 4. Application of the Guidelines
This section states that the design specifications that comprise the final Guidelines apply to all "covered multifamily dwellings" as defined in Section 2 of the Guidelines....
-
(3) Doors within individual dwelling units
The final Guidelines recommend that doors intended for user passage within individual dwelling units have a clear opening of at least 32 inches nominal width when the door is open 90 degrees...
-
11B-809.8.3 Door maneuvering clearance.
At the dwelling unit side of the primary entry doors, secondary exterior doors, and required exit doors maneuvering clearances shall be 44 inches (1118 mm) minimum in length measured...
-
Section 5 Guidelines
accessible entrance on an accessible route; (2) accessible and usable public common use areas; (3) doors usable by a person in a wheelchair, (4) accessible route into and through the covered dwelling...
-
904 Sales and Service Counters
This section covers the approach to counters (904.2), check-out aisles (904.3), sales and service counters (904.4), food service lines (904.5), and security glazing (904.6)....
-
Taylor ADA Blue-Lever Stands Intro.
Introduction to Taylor ADA Blue Lever Stands for point of sale machines....
-
Taylor ADA BLue-Lever™ Stand
Our Features and Benefits Access for All Assistive Auxiliary ADA TITLE III (Wheelchair or Standing) will have ease of use at Checkout. ADA True...
-
§8.24(d) Transition plan and time period for structural changes
(d) Transition plan and time period for structural changes. Except as provided in §8.25(c), in the event that structural changes to facilities will be undertaken to achieve program...
-
11B-809.10.8.1 Location
Lavatories without base cabinets shall be installed with the centerline 18 inches (457 mm) minimum from an adjoining wall or fixture to allow for forward approach. Lavatories with...
-
11B-809.10.8.5 Plumbing protection
Plumbing protection shall comply with Section 11B-809.9.7.
-
11B-809.10.8 Lavatories, vanities, mirrors and towel bars
Bathing rooms or powder rooms required to comply with Section 11B-809.10 shall provide lavatories complying with this section. Where mirrors or towel bars are provided, no less than...
-
11B-809.10.8.4 Knee and toe clearance
Knee and toe clearance shall be provided and comply with Section 11B-306.
-
11B-809.10.7.3 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom...
-
11B-809.10.7.2 Location
Water closets shall be located within bathrooms in a manner that permits a grab bar to be installed on at least one side of the fixture. The centerline of the water closet shall be...
-
11B-809.10.7.4 Seat height
Water closet seats shall be 15 inches (381 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat above the finish floor.
-
904 Check-Out Aisles and Sales and Service Counters
904 Check-Out Aisles and Sales and Service Counters...
