Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5....
Search Results "Hoistway Sign"
Commonly Searched Documents
-
11B-216.4.4 Delayed egress locks
-
A4.30.8 Illumination Levels
Illumination levels on the sign surface shall be in the 100 to 300 lux range (10 to 30 footcandles) and shall be uniform over the sign surface....
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves....
-
11B-812.8.7 Location
Required identification signs shall be visible from the EVCS it serves....
-
Toilet Rooms and Bathing Rooms: ADA Standard Section 216.8
Section 216.8 covers scoping requirements in the current ADA Standards for signs at toilet rooms and bathing rooms.
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side....
-
Audible and Visual Indicators: ADA Standard Section 708.2
Signs indicating the meaning of visual signals should be provided....
- Rockwood Manufacturing Company BFM687 BFM Series Men's ADA Toilet Room Molded Plastic Sign
- Rockwood Manufacturing Company BFM688 BFM Series Women's ADA Toilet Room Molded Plastic Sign
- Rockwood Manufacturing Company BFM689 BFM Series Unisex ADA Toilet Room Molded Plastic Sign
-
H1
If a sign is provided at the toilet room entrance (e.g. Men, Women, Boys, Girls, etc.), is a sign with raised characters and Braille mounted on the wall adjacent to the latch?...
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1008.1.9.7, item 5.1 at doors with delayed egress locks shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters...
-
11B-216.4.4 Delayed egress locks
Signs required by Chapter 10, Section 1010.1.9.7, Item 6.4 at doors with delayed egress locks shall comply with Sections 11B-703.1 _|Signs; General|_ 11B-703.2 _|Signs; Raised Characters...
-
11B-708.2 Audible and visual indicators
Signs indicating the meaning of visual signals should be provided. ◼...
-
Tactile Signage
Tactile Signage Raised and Braille characters are required on signs that "designate permanent rooms and spaces."...
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60 inches (1524...
-
M1
If a sign is provided at the toilet room entrance (e.g....
-
Raised Characters: ADA Standard Section 703.2
Signs that are designed to be read by touch should not have sharp or abrasive edges. ...
-
11B-216.10 Assistive listening systems
Assistive listening signs shall comply with Section 11B-703.5 _|Signs; Visual Characters|_ and shall include the International Symbol of Access for Hearing Loss complying with Section 11B...
-
11B-216.10 Assistive listening systems
Assistive listening signs shall comply with Section 11B-703.5 _|Signs; Visual Characters|_ and shall include the International Symbol of Access for Hearing Loss complying with Section 11B...
-
11B-504.8 Floor identification
It is not possible to meet the requirements for both the "Floor Identification Signs" and the "Fire Department Signs" with a single sign at each stair level, although this is frequently...
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5 _|Signs; Visual Characters|_....
-
Mounting Location and Height [4.30.6]
Mounting Location and Height [4.30.6] Placement of tactile signs aside doors (latch-side) provides safety since locating signs on doors that swing out is hazardous....
-
Signage
This sign must include the international symbol of access to assistive listening systems (specified in 4.30.7)....