(1) Accessible sleeping rooms shall have a 36 in (915 mm) clear width maneuvering space located along both sides of a bed, except that where two beds are provided, this requirement can be...
Search Results "Dressing Room"
Filters
Commonly Searched Documents
-
9.2.2(1)
-
§ 36.406(e) Housing at a place of education.
subject to this section shall comply with the provisions of the 2010 Standards applicable to transient lodging, including, but not limited to, the requirements for transient lodging guest rooms...
-
§ 36.406(c) Places of lodging
proposed standards shall comply with the provisions of the proposed standards that apply to transient lodging, including, but not limited to the requirements for transient lodging guest rooms...
-
Verify Framing
clearances/landings at doors. 11B-404 Distance between doors in series. 11B-404.2.6 Grab bar backing in toilet/shower rooms...
-
Verify Framing
clearances/landings at doors. 11B-404 Distance between doors in series. 11B-404.2.6 Grab bar backing in toilet/shower rooms...
-
Vertical Clearance: ADA Standard Section 307.4
Section 307.4 covers the current ADA Standards for vertical clearance.
-
Sleeping Areas: ADA Standard Section 806.2.3
At least one sleeping area shall provide a clear floor space complying with 305 on both sides of a bed. The clear floor space shall be positioned for parallel approach to the side of...
-
11B-809.10.6.6 Controls
Controls and operating mechanisms shall comply with Section 11B-309.4.
-
11B-809.10.6.7 Shower enclosures
Doors and panels of shower enclosures shall comply with Section 11B-809.10.5.4.
-
11B-806.2.3 Sleeping areas
At least one sleeping area shall provide a 36 inch (914 mm) by 48 inch (1219 mm) minimum clear space on both sides of a bed. The clear space shall be positioned for parallel approach...
-
11B-809.10.6.2 Slope
The slope of the shower floor shall be 1/2 inch (12.7 mm) per foot maximum in any direction and shall slope to a drain. The floor surfaces shall be of Carborundum, grit-faced tile or...
-
11B-809.10.5.2 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: 1. Where bathtubs are installed without surrounding walls reinforcement shall be provided for floor-mounted grab...
-
ADA Sign Depot California Title 24 Unisex Restroom Door Sign Circle and Triangle - 12" x 12"
Item # T24-1003 Unisex Wheelchair Accessible Restroom Door Sign Title 24 compliant non-glare matte finish Tactile (1/32-inch raised) pictograms Title 24...
-
EXTREME WALKS
Requires the Registered User plan or above. Login! -
Section 36.406(c) Places of Lodging (Section-by-Section Analysis)
The proposed rule, in the definitions section, clarifies that a covered "place of lodging" is a facility that provides guest rooms for sleeping for stays that are primarily short-term in...
-
General: ADA Standard Section 224.1
Section 224.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for transient lodging guest rooms.
-
Water Closet Location.
Training toilets were either located in a separate room as a unisex toilet or combined with a bathing facility, for use by staff in retraining residents in toileting skills....
-
Features of an Accessible Examination Room
Features of an Accessible Examination Room 1....
-
603.2.1 Turning Space
Turning space complying with 304 shall be provided within the room....
-
9.5.2(1)(a)
(a) The provisions of 9.5.3 and 9.1.5 shall apply to sleeping rooms and beds....
-
603.2.1 Turning Space
Turning space complying with 304 shall be provided within the room....
-
Feature 2 - Routes to the Building Entrance
Feature 2 - Routes to the Building Entrance Accessible routes connect accessible onsite features (e.g., bus stop, parking) to the building entrance. There must be at least...
-
Producing Printed Material in Large Print
Many people with visual disabilities have some sight and can read large print. Large print material can be produced by using a photo copier or a computer where an 18-point type size...
