Cross slope is the side-to-side slope of the surface of an ORAR....
Search Results "Curb Ramp Slope"
Filters
Commonly Searched Documents
-
Cross Slope [1016.7.2]
-
1.1.6 Flatness of walk cross slope
1.1.6 Flatness of walk cross slope....
-
§ 38.159(c)(2) Ramp surface
(2) Ramp surface....
-
405.7.1 Slope
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
405.7.1 Slope
EXCEPTION: Slopes not steeper than 1:48 shall be permitted....
-
11B-405.7.4 Change in direction
Ramps that change direction between runs at landings shall have a clear landing 60 inches (1525 mm) minimum by 72 inches (1829 mm) minimum in the direction of downward travel from the upper...
-
Guldmann Excellent Ramp System
With this new ramp system, you can easily assemble a ramp to fit any type of door opening or threshold and still be able to close the door without taking the ramp away. ...
-
Hollaender ADA Handrail Systems: Grabrail (ADA Rail)
ADA rails are also used on ramps to help a person in/with a wheel chair, walker or cane safely go up the ramp....
-
General: ADA Standard Section 505.1
Section 505.1 of the ADA Standards covers information in the current ADA Standards for handrails.
-
Step 3: Apply the Accessibility Provisions
This step involves looking at FSTAG, sections 7.4.1 through 7.4.8, which contain the technical requirements for trail grade, cross slope, resting interval, surface, clear tread width, passing...
-
A. Passenger Drop-Off Areas
Where a curb separates the vehicle space from the access aisle or the access aisle from an accessible route, a curb ramp must be provided so people with mobility disabilities can get to...
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum.
-
4d.
If a ramp is more than 30 feet long, is a level landing at least 60 inches long provided every 30 feet of horizontal length?...
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
When Ramps Are Required
The ramp system, consisting of ramp runs and landings, must connect at least 25 percent of the elevated play components. ...
-
Aisle Stairs and Ramps in Assembly Areas
Aisle Stairs and Ramps in Assembly Areas....
-
11B-1008.2.5.3 Handrails
Where required on ramps serving play components, the handrails shall comply with Section 11B-505 except as modified by Section 11B-1008.2.5.3....
-
1017.7.1 Maximum Running Slope and Segment Length
The running slope of any segment of a trail shall not be steeper than 1:8 (12%). ...
-
1017.7.1 Maximum Running Slope and Segment Length
The running slope of any segment of a trail shall not be steeper than 1:8 (12%)....
-
PlayLSI Double-Wide Ramp
The Double-Wide Ramp does just that. By connecting play products, this playground ramp creates equitable access for children and grown-up companions of all abilities....
-
11B-505.1 General
Handrails provided along walking surfaces complying with Section 11B-403, required at ramps complying with Section 11B-405, and required at stairs complying with Section 11B-504 shall comply...
-
SECTION 1010 RAMPS
SECTION 1010 RAMPS [DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is...
