In reviewing station plans, FRA and FTA intend to give particular scrutiny to larger, more complex, stations and those with higher passenger volumes to ensure that the railroad’s plan will...
Search Results "Compliance Review"
-
QUESTION: MUST RAILROADS SUBMIT PLANS FOR MEETING THE PERFORMANCE STANDARD OF SECTION 37.42 ON A STATION-BY-STATION BASIS?
-
§ 37.135(d) Phase-in of implementation
Each plan shall provide full compliance by no later than January 26, 1997, unless the entity has received a waiver based on undue financial burden....
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
-
11B-504.5 Nosings
Exception: In existing buildings there is no requirement to retroactively alter existing nosing projections of 1½ inches (38 mm) which were constructed in compliance with the building code...
-
Oasis Apron Kit, Sandstone
The apron will give ADA compliance when installed below the upper unit....
-
SafePath Courtedge™ Reducer Ramps
installation of raised wood floors, especially in retrofit and replacement projects, are problematic when faced with interpreting federal and state ADA (Americans with Disabilities Act) access compliance...
-
Attachment A: Disability-Related Issues for Emergency Plan Coordinators
(Give a copy of this checklist to personnel who are responsible for creating, reviewing, maintaining, practicing and revising emergency plans.)...
-
11B-707.3 Operable parts
Where automatic teller machines and fare machines do not require compliance with 11B-707.2, compliance with 11B-309.2 and 11B-309.3 shall not be required....
-
Fair Housing Act Design Manual
Our staff have completed a full review of the Manual, and the portions describing the requirements are clearly differentiated from the technical assistance recommendations....
-
§382.45(a)
You must make this copy available for review by any member of the public on request....
-
Are exit doors usable only in one direction required to comply on both sides?
Under the ADA Standards, compliance is not required on both sides of those doors or gates that can be used in one direction only, such as exit-only doors....
-
Ground Surfaces: ADA Standard Section 1008.2.6
Ground surfaces must be inspected and maintained regularly to ensure continued compliance with the ASTM F 1951 standard....
-
General: ADA Standard Section 204.1
Section 204.1 of the ADA Standards covers information on scoping requirements for protruding objects in the most current ADA Standards.
-
Technically Infeasible
essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces, or features that are in full and strict compliance...
-
Break Out Opening: ADA Standard Section 404.3.6
Section 404.3.6 covers the current ADA Standards for the break out openings at swinging or sliding doors and gates.
-
11B-223.2 Hospitals, rehabilitation facilities, psychiatric facilities and detoxification facilities
All public use and common use areas shall be accessible in compliance with this chapter....
-
11B-223.2 Hospitals, rehabilitation facilities, psychiatric facilities and detoxification facilities
All public use and common use areas shall be accessible in compliance with this chapter....
-
ADA One
Our services reflect our practical knowledge and insights into federal expectations for compliance....
-
B. JURISDICTION
Part 35, Subpart F, to determine whether Lewisboro is in compliance with title II of the ADA and the title II DOJ Regulations, to issue findings, and, where appropriate, to negotiate and...
-
§ 37.135(c)(2)
(2) In the event of any change in circumstances that results in an entity which has submitted a certification of continued compliance falling short of compliance with §§37.121-37.133, the...
-
§ 36.607 Guidance concerning model codes.
Upon application by an authorized representative of a private entity responsible for developing a model code, the Assistant Attorney General may review the relevant model code and issue...
-
2.2.2
2.2.2 Set requirements for independent testing agencies that may be required to perform measurement for compliance....
-
Re: Service Counters
For code compliance, one must create a reasonable standard for sufficient depth for accessible use. Reasonable persons will disagree on that number. Why bother? ...
-
Q10: What should a school district do if it does not believe that a student needs special education or related services as described in the Section 504 regulation?
notified of any evaluation or placement actions, allowed to examine their child's records, afforded an impartial hearing with opportunity for representation by counsel, and provided a review...
