Spout outlets shall be 36 inches (915 mm) maximum above the finish floor or ground.
Search Results "Signage Height"
-
602.4 Spout Height
-
4.15.2* Spout Height
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a)).
-
4.15.2* SPOUT HEIGHT
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a)). Figure 27 Drinking Fountains and Water...
-
602.4 Spout Height
Spout outlets shall be 36 inches (915 mm) maximum above the finish floor or ground.
-
Initial Measures and Transfer Setup
The device seat to floor height was measured as the linear distance between the front of the seat, center-line point on top of the cushion (if present) and the floor (Figure 3 left). ...
-
Smith System Husky Square Activity Table
Available in two height ranges, 15-24″ and 21-30″, 48 x 48″ table top size....
-
Height: ADA Standard Section 1009.4.2
The height of the transfer wall shall be 16 inches (405 mm) minimum and 19 inches (485 mm) maximum measured from the deck....
-
Seton Directional Signs - Accessible Route with ISA and Arrow
Each sign is carefully engraved with the ISA symbol Setonply® is a tough, stain-resistant multi-layered acrylic and cleans easily with a damp cloth 12"W x 4"H signs are...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 2
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 2 - 240mm x 240mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) -...
-
Signaids Floor Numbering and Stair Shaft Designation-Style 1
FLOOR NUMBERING & STAIR SHAFT DESIGNATION - Braille and Tactile Style 1 - 190mm x 130mm - Gr. 1 Braille and Tactile sign - AODA Compliant (Canada) - Available in 3...
-
Height: ADA Standard Section 1008.3.1.2
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
Smith System Trespa Planner Science Table 30″ Deep 11288
Table height adjusts 24″ to 34″ in 1″ increments, meets ADA requirements. The 1″ adjustable leveling glides provide stability on uneven floors....
-
4.30.4* RAISED CHARACTERS OR SYMBOLS
Letters and numbers on signs shall be raised 1/32 in (0.8 mm) minimum and shall be sans serif characters. Raised characters or symbols shall be at least 5/8 in (16 mm) high, but no...
-
11B-703.6 Pictograms
Pictograms shall comply with Section 11B-703.6. Advisory 11B-703.6 Pictograms. Pictograms and other symbols, such as the International Symbol of Accessibility (ISA), which are...
-
703.7.2 Symbols
703.7.2 Symbols
-
703.6 Pictograms
Pictograms shall comply with 703.6.
-
11B-216.8.1 Geometric symbols
SECTION TITLE NOTES 11B-216.8.1 Geometric symbols. Provides Exceptions...
-
11B-703.7.2.6.4 Edges and vertices on geometric symbols
SECTION TITLE NOTES 11B-703.7.2.6.4 Edges and vertices on geometric symbols Provides...
-
T702.8 Contrast
Characters shall contrast with their background with either light characters on a dark background or dark characters on a light background. Where provided, protective surfaces over...
-
C. Contrast
C. Are all signs at this lodging facility made without reflective materials, such as, brass, chrome, gold, glass or mirror used as text or background, and have letter and numbers...
-
A4.30.8 Illumination Levels
Illumination levels on the sign surface shall be in the 100 to 300 lux range (10 to 30 footcandles) and shall be uniform over the sign surface. Signs shall be located such that the...
-
4.30.8* Illumination Levels
(Reserved).
-
Illumination Levels (Reserved) [4.30.8]
Illumination Levels (Reserved) [4.30.8] Recommendations: Due to variations in field conditions, illumination levels are not specified in ADAAG. A level from 10 to 30 footcandles...
-
703.7.2 Symbols
[See subsections ...]
