(5) Top of handrail gripping surface shall be mounted between 34 in and 38 in (865 mm and 965 mm) above stair nosings.
Search Results "Seat Height"
Filters
Commonly Searched Documents
-
4.9.4(5)
-
American Specialties Roval™ Collection Surface Mounted Seat Cover Dispenser Model 20477-SM
Requires the Premium User plan or above. (Login or upgrade your account!) -
609.4 Side Wall Grab Bar Height
-
609.4 Rear Wall Grab Bar Height
-
5.8.2.5 Toe Height Recommendation
recommended that the toe height be set to 18 inches (when the breast platform is at the 34 inch height discussed above)....
-
Variety Freedom Program
Assistance animals Hoists and lifts Modified vehicle access Standing and walking assistance like gait trainers, walkers, standing frames and positioning systems Specialized car seating...
-
4.30.6 Mounting Location and Height
4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
Museum Gift Shop
The 42" height of the main cashier counter and the 42 1/2" height of the second cashier counter exceed the maximum 36" allowable height above the finished floor....
-
§ 38.27(a)
(a) Each vehicle shall contain sign(s) which indicate that seats in the front of the vehicle are priority seats for persons with disabilities, and that other passengers should make such...
-
M303.4.1 Breast Platforms
The height of the breast platform shall be 30 inches (760 mm) high minimum and 42 inches (1065 mm) high maximum above the floor when in use by a patient seated in a wheelchair....
-
§ 38.55(a)
(a) Each vehicle shall contain sign(s) which indicate that certain seats are priority seats for persons with disabilities, and that other passengers should make such seats available to those...
-
The Impact of Transfer Setup on the Performance of Independent Transfers: Phase I Final Report
The Impact of Transfer Setup on the Performance of Independent Transfers: Final Report REPORT PREPARED FOR: U.S. ACCESS BOARD, WASHINGTON, DC Authors: Alicia Koontz, PhD,...
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor....
-
§ 38.113(d)(2) Exception
New cars operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....
-
Handrails
...are there handrails on both sides of the stair at a uniform height of 34"-38" above the front edge of the step?...
-
802.4.2 Identification
Each designated aisle seat shall be identified by a sign or marker. Advisory 802.4.2 Identification....
-
802.4.2 Identification
Each designated aisle seat shall be identified by a sign or marker. Advisory 802.4.2 Identification....
-
802.4.2 Identification
Each designated aisle seat shall be identified by a sign or marker. Advisory 802.4.2 Identification....
-
T212 Seat Belts and Shoulder Belts
[See subsections ...]
-
Hologic, Inc.
Breast biopsies may be performed with the patient in a prone, seated, or decubitus position....
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
Section 36.308 Seating in Assembly Areas (Section-by-Section Analysis)
Section 36.308 Seating in Assembly Areas (Section-by-Section Analysis) In the 1991 rule, § 36.308 covered seating obligations for public accommodations in assembly areas....
-
Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?
A1.) The consistent technical assistance on this question has been that both are subject to tolerances.
-
6.3
6.3 Wheelchair spaces shall be integrated into their seat row and shall not be separated by any aisle or other break from the companion seat in the same row....
