Transfer Surface Size – M302.2.2 Seated Position The issue of seat depth was discussed and decided during the full committee meetings as follows: depth of 17 inches minimum....
Search Results "Seat Height"
Filters
Commonly Searched Documents
-
Transfer Surface Size – M302.2.2 Seated Position
-
Alternate Roll-In Type Shower Compartments: ADA Standard Section 608.3.3
Section 608.3.3 covers the current ADA Standards for grab bars in alternate roll-in type shower compartments.
-
11B-608.3.3 Alternate roll-in type shower compartments
Grab bars shall not be provided above the seat. Grab bars shall be installed 6 inches (152 mm) maximum from adjacent walls....
-
Smith System Husky Square Activity Table
Available in two height ranges, 15-24″ and 21-30″, 48 x 48″ table top size....
-
§ 35.138(d)(2) Insufficient additional contiguous seats available
(2) Insufficient additional contiguous seats available....
-
4.7.9.3 Height
The counter or rim of the sink shall be no more than 34 inches (865 mm) above the floor or ground. Water spouts must be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum...
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
§ 35.138(b) Identification of available accessible seating
(b) Identification of available accessible seating. A public entity that sells or distributes tickets for a single event or series of events shall, upon inquiry—...
-
§ 38.55 Priority seating signs
[See subsections ...]
-
§ 38.75 Priority seating signs
[See subsections ...]
-
M303.2.4.2.2 Height
Between 9 inches (230 mm) and 27 inches (685 mm) above the floor, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for every 6 inches (150 mm) in height...
-
Jamb Signage
...are all elevator jambs provided with signs placed on both sides designating the floor with 2" minimum height raised letters and Braille characters centered at 60" above the finish floor...
-
Clearance: ADA Standard Section 607.2
Section 607.2 covers the current ADA Standards for bathtub clearances.
-
Transfer Surface Height (M301.2.1 and M302.2.1)
For many patients who use mobility devices, independent transfer is possible only if the height of the transfer surface is at or near the seat height of their mobility device....
-
All Access, Inc. ADA Platforms
Designed according to the ADA Standards for Accessible Design, All Access offers elevated viewing platforms featuring ramps and guardrails that can easily work with your current...
-
606.3 Lavatory Height
-
M305.2.3 Height
During use, the tops of transfer support gripping surfaces shall be 6 inches (150 mm) minimum and 19 inches (485 mm) maximum higher than the top of the associated uncompressed...
-
Sec.36.308(a)(2)
(2) If removal of seats is not readily achievable, a public accommodation shall provide, to the extent that it is readily achievable to do so, a portable chair or other means to permit a...
-
Smith System Trespa Planner Science Table 30″ Deep 11288
Table height adjusts 24″ to 34″ in 1″ increments, meets ADA requirements. The 1″ adjustable leveling glides provide stability on uneven floors....
-
Midmark 647 Barrier-Free® Power Podiatry Procedures Chair
Patient Load Rating: 450 lb. (204 kg) Base Height: Minimum 19" (48.3 cm) Maximum 40" (101.6 cm) Foot Section Height: With foot section retracted 15.5" to 54" (39.4...
-
Midmark 630 HUMANFORM™ Procedures Table
and improved ergonomics Active Sensing Technology™ (AST) enhances patient and provider safety by helping avoid harmful impact during movement, such as objects being caught under the seat...
-
4.8.5(5)
(5) Top of handrail gripping surfaces shall be mounted between 34 in and 38 in (865 mm and 965 mm) above ramp surfaces.
