The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
Search Results "Post Mounted Object"
Commonly Searched Documents
-
609.3 Spacing
-
609.3 Spacing
The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm) minimum....
-
609.3 Spacing
The space between the grab bar and projecting objects below and at the ends shall be 1 1/2 inches (38 mm) minimum....
-
11B-604.8.1.5 Grab bars
Where separate grab bars are required on adjacent walls at a common mounting height, an L-shaped grab bar meeting the dimensional requirements of Sections 11B-604.5.1 and 11B-604.5.2 shall...
- Bobrick ClassicSeries Surface-Mounted Convertible Paper Towel Dispenser/Waste Receptacle B-3949
- Compliance Signs Parking Sign PKE-20710
-
I. Final
In the event that no objections to this Settlement Agreement are raised prior to or at the Fairness Hearing, that any objections that have been raised have been fully and formally withdrawn...
-
106.5.40 Operable Part
A component of an element used to insert or withdraw objects, or to activate, deactivate, or adjust the element....
-
Operable Part
A component of an element used to insert or withdraw objects, or to activate, deactivate, or adjust the element....
-
OPERABLE PART
A component of an element used to insert or withdraw objects, or to activate, deactivate, or adjust the element....
-
OPERABLE PART
A component of an element used to insert or withdraw objects, or to activate, deactivate, or adjust the element....
- Seton 12" x 18" Symbol of Access Parking Sign Kit - Reserved Parking
- Bobrick Koala Kare Horizontal, Wall-Mounted Baby Changing Station KB200
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
f-v
Are the controls and operating mechanisms mounted no more than 54 inches above the floor for a side reach or 48 inches for a forward reach?...
-
M21
If a coat hook is provided, is it mounted no higher than 54 inches above the floor for a side approach or 48 inches above the floor for a front approach?...
-
Coin Slot Height
Is it mounted with the coin slot no higher than 54" above the floor, and one pay phone on that floor with the highest operable element no higher than 48" above the floor?...
-
A4.17.5 Doors
To make it easier for wheelchair users to close toilet stall doors, doors can be provided with closers, spring hinges, or a pull bar mounted on the inside surface of the door near the hinge...
-
A4.23.9 Medicine Cabinets
Shelves, drawers, and floor-mounted cabinets can be provided within the reach ranges of disabled people....
-
903.6 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...