In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
Search Results "Folding Shower Seat"
-
1009.2.2 Seat Location
-
Shower and Sauna Doors in Transient Lodging Facilities
Shower and Sauna Doors in Transient Lodging Facilities....
-
§ 38.95(d) Mobility aid seating location
(d) Mobility aid seating location. Spaces for persons who wish to remain in their wheelchairs or mobility aids shall have a minimum clear floor space 48 inches by 30 inches....
-
A4.16.3 Height
Height preferences for toilet seats vary considerably among disabled people....
-
A4.16.3 HEIGHT
Preferences for toilet seat heights vary considerably among disabled people....
-
F213.3.6 Bathing Facilities
Where bathtubs or showers are provided, at least one bathtub complying with 607 or at least one shower complying with 608 shall be provided....
-
213.3.6 Bathing Facilities
Where bathtubs or showers are provided, at least one bathtub complying with 607 or at least one shower complying with 608 shall be provided....
-
213.3.6 Bathing Facilities
Where bathtubs or showers are provided, at least one bathtub complying with 607 or at least one shower complying with 608 shall be provided....
-
4.1.3(19)(a)
all fixed seats shall be aisle seats with no armrests on the aisle side, or removable or folding armrests on the aisle side....
-
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
1009.2.2 Seat Location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (405 mm) minimum from the edge of the pool....
-
1002.4.7 Companion Seats
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
4.13.11* DOOR OPENING FORCE
(b) interior hinged doors: 5 lbf (22.2N) (c) sliding or folding doors: 5 lbf (22.2N) These forces do not apply to the force required to retract latch bolts or disengage other devices...
-
1134A.6, Item 1
When one or more shower stalls are provided within the same dwelling unit, at least one shower stall shall comply with one of the following requirements....
-
1134A.6, Item 1
When one or more shower stalls are provided within the same dwelling units, at least one shower stall shall comply with one of the following requirements....
-
Seat width and depth
We selected 18 inches minimum seat width as a starting point with the potential to grow to 30 inches. ...
-
Seat and Row Designations
Commenters requested that seat and row designations in assembly areas be exempt from the requirements for signage....
-
Bradley Diplomat Seat Cover Dispenser 5A40
NEW! Diplomat Washroom Accessories designed with unique dual-curve geometry Easier top load model with front keying Over 50 Diplomat models provide a unified...
-
806.2.4 Toilet and Bathing Facilities
No fewer than one water closet, one lavatory, and one bathtub or shower shall comply with applicable requirements of 603 through 610....
-
806.2.4 Toilet and Bathing Facilities
No fewer than one water closet, one lavatory, and one bathtub or shower shall comply with applicable requirements of 603 through 610....
-
Only Safety Affects Seat Assignments
Only Safety Affects Seat Assignments You must not exclude a passenger with a disability from any seat in an exit row or other location or require a passenger with a disability to sit...
-
Integration: ADA Standard Section 221.2.2
Section 221.2.2 covers scoping requirements in the current ADA Standards for integration of wheelchair spaces in assembly areas.
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
