(a) In places of assembly with fixed seating accessible wheelchair locations shall comply with 4.33.2, 4.33.3, and 4.33.4 and shall be provided consistent with the following table:...
Search Results "Fixed Pool Lift"
Filters
Commonly Searched Documents
-
4.1.3(19)(a)
-
Common Questions (Elevators and Platform Lifts)
Common Questions
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
-
M301.4.2 Clearance Around Base
The base of diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the...
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the...
-
M301.4.2 Clearance Around Base
[See subsections ...]
-
Irwin Seating Company ADA Transfer Arm
Flip-up armrest to accommodate someone transferring from a wheel chair to the chair. Ends are provided with a recognizable ADA label.
-
Irwin Seating Company ADA Swing-Away Aisle Panels
Many aisle end panels can be manufactured to swing open to allow an individual to transfer between a wheelchair and the theatre chair. This option keeps the design element of the...
-
11B-206.7.7 Amusement rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
F206.7.7 Amusement Rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
206.7.7 Amusement Rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
11B-206.7.7 Amusement rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides. ...
-
11B-206.7.7 Amusement rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
§ 38.159(b)(7) Platform gaps
When the platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed...
-
206.7.7 Amusement Rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
T402.2 Design Load
Ramps and bridgeplates 30 inches (760 mm) or more in length shall be designed to support a load of 600 pounds (273 kg) minimum, placed at the centroid of the ramp distributed over an...
-
12145(a) Granting
(a) Granting With respect to the purchase of new buses, a public entity may apply for, and the Secretary may temporarily relieve such public entity from the obligation under...
-
§ 37.13 Effective date for certain vehicle specifications
[56 FR 64215, Dec. 9, 1991]
-
§ 38.125(b)(2) Controls
(2) Controls—
-
§ 38.125(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.159(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.83(b)(2) Controls
(2) Controls—
-
Elevators and Platform Lifts
[See subsections ...]
-
Section 37.121 Requirement for Comparable Complementary Paratransit Service
Section 37.121 Requirement for Comparable Complementary Paratransit Service This section sets forth the basic requirement that all public entities who operate a fixed route system have...
