Flip-up armrest to accommodate someone transferring from a wheel chair to the chair. Ends are provided with a recognizable ADA label.
Search Results "Fixed Pool Lift"
Commonly Searched Documents
- Irwin Seating Company ADA Transfer Arm
- Irwin Seating Company ADA Swing-Away Aisle Panels
-
4.1.3(19)(a)
(a) In places of assembly with fixed seating accessible wheelchair locations shall comply with 4.33.2, 4.33.3, and 4.33.4 and shall be provided consistent with the following table:...
-
1131A.2 Changes greater than ½ inch
than ½ inch (12.7 mm) shall be made by means of a sloped surface not greater than 1 unit vertical in 20 units horizontal (5-percent slope), or a ramp, elevator or platform (wheelchair) lift...
-
11B-902.4.2 Height
The tops of tables and counters shall be 26 inches (660 mm) minimum and 30 inches (762 mm) maximum above the finish floor or ground.
-
Common Questions (Elevators and Platform Lifts)
Common Questions
-
M301.4.2 Clearance Around Base
The base of diagnostic equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the...
-
M301.4.2 Clearance Around Base
The base of the equipment shall provide a clearance 6 inches (150 mm) high minimum measured from the floor and 36 inches (915 mm) deep minimum measured from the edge of the...
-
M301.4.2 Clearance Around Base
[See subsections ...]
-
11B-206.7.7 Amusement rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
F206.7.7 Amusement Rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
206.7.7 Amusement Rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
11B-206.7.7 Amusement rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides. ...
-
11B-206.7.7 Amusement rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
§ 38.159(b)(7) Platform gaps
When the platform is at vehicle floor height with the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed...
-
206.7.7 Amusement Rides
Platform lifts shall be permitted to provide accessible routes to load and unload areas serving amusement rides....
-
T402.2 Design Load
Ramps and bridgeplates 30 inches (760 mm) or more in length shall be designed to support a load of 600 pounds (273 kg) minimum, placed at the centroid of the ramp distributed over an...
-
12145(a) Granting
(a) Granting With respect to the purchase of new buses, a public entity may apply for, and the Secretary may temporarily relieve such public entity from the obligation under...
-
§ 37.13 Effective date for certain vehicle specifications
[56 FR 64215, Dec. 9, 1991]
-
§ 38.125(b)(2) Controls
(2) Controls—
-
§ 38.125(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.159(b)(4) Power or equipment failure
(4) Power or equipment failure. Platforms stowed in a vertical position, and deployed platforms when occupied, shall have provisions to prevent their deploying, falling, or folding...
-
§ 38.83(b)(2) Controls
(2) Controls—
-
Section 37.121 Requirement for Comparable Complementary Paratransit Service
Section 37.121 Requirement for Comparable Complementary Paratransit Service This section sets forth the basic requirement that all public entities who operate a fixed route system have...