Where provided, areas that are raised or depressed and accessed by ramps or platform lifts with entry ramps shall provide unobstructed turning space complying with 304....
Search Results "Character Height (Raised)"
-
808.2 Turning Space
-
Initial Measures and Transfer Setup
The device seat to floor height was measured as the linear distance between the front of the seat, center-line point on top of the cushion (if present) and the floor (Figure 3 left). ...
-
The Brewer Company, LLC
for adjustable height transfer surfaces....
-
Grade One Braille Alphabet and Numerals
The number sign, dots 3, 4, 5, 6, placed before a character, makes a number: a preceded by the number sign is 1, b is 2, etc. ...
-
Additional Technical Criteria Considered for Handrails on Ramps
These technical criteria are available at http://www.access-board.gov/ada-aba/final.cfm#a505 and address continuity, height, clearance, gripping surface, cross section, surfaces, fittings...
-
Height: ADA Standard Section 1009.4.2
The height of the transfer wall shall be 16 inches (405 mm) minimum and 19 inches (485 mm) maximum measured from the deck....
-
Seton ADA Braille Signs - Exit 89426
ADA compliant signs clearly indicate exits and identify important emergency related information One-piece, injection molded signs are constructed with a non-glare, matte...
-
Seton ADA Braille Sign - Emergency Exit Only 89424
ADA compliant signs clearly indicate exits and identify important emergency related information One-piece, injection molded signs are constructed with a non-glare, matte...
-
Seton Standard Braille Signs - Exit 31935
These 8" x 2" Braille signs clearly post important information for both the visually impaired and the sighted Available in many colors, each sign is outline engraved and crafted...
-
Smith System Husky Square Activity Table
Available in two height ranges, 15-24″ and 21-30″, 48 x 48″ table top size....
-
Height: ADA Standard Section 1008.3.1.2
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
703.5 Visual Characters
703.5 Visual Characters. Visual characters shall comply with 703.5....
-
3.2 Physical Accessibility Barriers and Solutions
Barriers Solutions Simple/Low cost Involved / High cost Protruding Objects mounted on the wall (e.g., fire extinguisher) may...
-
Smith System Trespa Planner Science Table 30″ Deep 11288
Table height adjusts 24″ to 34″ in 1″ increments, meets ADA requirements. The 1″ adjustable leveling glides provide stability on uneven floors....
-
703.4.1 Height Above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60 inches...
-
703.5 Visual Characters
Visual characters shall comply with 703.5....
-
703.5 Visual Characters
Visual characters shall comply with 703.5....
-
11B-602.4 Spout height
Spout outlets shall be 36 inches (914 mm) maximum above the finish floor or ground.
-
11B-602.4 Spout height
Spout outlets shall be 36 inches (914 mm) maximum above the finish floor or ground.
-
1005.2.1 Height
1005.2.1 Height. At least 25 percent of the railings, guards, or handrails shall be 34 inches (865 mm) maximum above the ground or deck surface....
-
National Network of ADA Centers
of a low height transfer number....
-
4.7.9.3 Height
The counter or rim of the sink shall be no more than 34 inches (865 mm) above the floor or ground. Water spouts must be 28 inches (710 mm) minimum and 36 inches (915 mm) maximum...
-
A5.1 General
This section requires that where such a dining counter is provided, a portion of the counter shall be at the required accessible height....
-
Mounting Location and Height [4.30.6]
Mounting Location and Height [4.30.6] Placement of tactile signs aside doors (latch-side) provides safety since locating signs on doors that swing out is hazardous....
