A play component that is approached and exited at the ground level....
Search Results "Signal Level"
Filters
Commonly Searched Documents
-
Ground Level Play Component
-
GROUND LEVEL PLAY COMPONENT
[DSA-AC] A play component that is approached and exited at the ground level....
-
R306.2 Pedestrian Signal Phase Timing
R306.2 Pedestrian Signal Phase Timing....
-
Can audible signals for an elevator operate only when needed by a passenger who needs them through activation of dedicated “accessibility” control?
No, audible (and visible) signals required for elevators must function automatically at all times an elevator is operational....
-
Ground Level and Elevated Play Components: ADA Standard Section 1008.2.1
Accessible routes serving ground level play components and elevated play components shall be permitted to use the exceptions in 1008.2.1. EXCEPTIONS: 1....
-
Pedestrian Signal Phase Timing (Section-by-Section Analysis)
Pedestrian Signal Phase Timing (Section-by-Section Analysis) Pedestrian signal phase timing must comply with referenced MUTCD standards and use a pedestrian clearance time that is calculated...
-
Carpenter's levels
Carpenter's levels are used for setting level and plumb only. To determine angles the level must be used with a measuring tape to determine slope....
-
R209.2 Alterations
Existing pedestrian signals shall comply with R209.1 when the signal controller and software are altered, or the signal head is replaced....
-
4.10.4 Hall Lanterns
A visible and audible signal shall be provided at each hoistway entrance to indicate which car is answering a call....
-
§ 38.93(c) Signals
(c) Signals. If doors to the platform close automatically or from a remote location, auditory and visual warning signals shall be provided to alert passengers or closing doors....
-
411.1 General
Where provided, audible signals or cues shall not be used as the only means of conveying information, indicating an action, or prompting a response...
-
Signal Type: ADA Standard Section 407.4.8.2.1
Section 407.4.8.2.1 covers the current ADA Standards for the signal type of audible elevator car indicators.
-
Leveling: ADA Standard Section 409.4.4
Section 409.4.4 covers the ADA Standards for the self-leveling feature in private residence elevators.
-
8.4 Recommendations
The signal-to-noise ratio for internally generated noise cannot be less than 18 dB. 4. The peak clipping levels down from the peak cannot be greater than 18 dB....
-
11B-240.2.1 Ground level play components
Ground level play components shall be provided in the number and types required by Section 11B-240.2.1....
-
R306.5 Channelized Turn Lanes at Other Signalized Intersections
R306.5 Channelized Turn Lanes at Other Signalized Intersections....
-
Synthesis of Literature Relevant to Roundabout Signalization to Provide Pedestrian Access - Final Report
Prepared by: Vaughan W. Inman Science Applications International Corporation and Gregory W. Davis Federal Highway Administration, RD&T 6300 Georgetown...
-
11B-809.8.4 Door signal devices
Every primary entrance to a residential dwelling unit with adaptable features shall be provided with a door buzzer, bell, chime or equivalent. The activating mechanism shall be...
-
Leveling: ADA Standard Section 408.4.4
Section 408.4.4 covers the ADA Standards for the self-leveling feature in limited-use/limited-application elevators.
-
§ 38.113(c) Signals
(c) Signals. If doors to the platform close automatically or from a remote location, auditory and visual warning signals shall be provided to alert passengers of closing doors...
-
11B-303.3 Beveled
A change in level of 1/2 inch (13 mm) is permitted to be 1/4 inch (6.4 mm) vertical plus 1/4 inch (6.4 mm) beveled....
-
11B-409.4.4 Leveling
Each car shall automatically stop at a floor landing within a tolerance of ½ inch (12.7 mm) under rated loading to zero loading conditions.
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....