At least 1 percent of the total number of seats, and no fewer than two, shall be semi-ambulant seats complying with Section 11B-802.5....
Search Results "Seat Width"
-
11B-221.6 Semi-ambulant seats
-
11B-221.6 Semi-ambulant seats
At least 1 percent of the total number of seats, and no fewer than two, shall be semi-ambulant seats complying with Section 11B-802.5....
-
11B-802.5 Semi-ambulant seats
Semi-ambulant seats shall provide at least 24 inches (610 mm) clear leg space between the front of the seat to the nearest obstruction or to the back of the seat immediately in front....
-
11B-802.5 Semi-ambulant seats
Semi-ambulant seats shall provide at least 24 inches (610 mm) clear leg space between the front of the seat to the nearest obstruction or to the back of the seat immediately in front....
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
11B-206.7.9 Team or player seating
Platform lifts shall be permitted to provide accessible routes to team or player seating areas serving areas of sport activity. Advisory 11B-206.7.9 Team or player seating....
-
11B-206.7.9 Team or player seating
Platform lifts shall be permitted to provide accessible routes to team or player seating areas serving areas of sport activity. Advisory 11B-206.7.9 Team or player seating....
-
11B-406.5.2 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum....
-
11B-406.5.2 Width
The clear width of curb ramp runs (excluding any flared sides), blended transitions, and turning spaces shall be 48 inches (1219 mm) minimum....
-
Figure 403.5.1 Clear Width of an Accessible Route – Drawing from the U.S. Access Board
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
-
11B-404.3.1 Clear width
The minimum clear width for automatic door systems in a doorway shall provide a clear, unobstructed opening of 32 inches (813 mm) with one leaf positioned at an angle of 90 degrees from...
-
11B-703.8.5 Character width
The uppercase letter “O” shall be used to determine the allowable width of all low resolution VMS characters of a font....
-
11B-703.8.5 Character width
The uppercase letter “O” shall be used to determine the allowable width of all low resolution VMS characters of a font....
-
Amusement Ride Seat
A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
Companion Seats: ADA Standard Section 1002.4.7
Where the interior width of the amusement ride is greater than 53 inches (1345 mm), seating is provided for more than one rider, and the wheelchair is not required to be centered within...
-
R407.4 Width
R407.4 Width. The clear width of a ramp run and, where handrails are provided, the clear width between handrails shall be 915 mm (3.0 ft) minimum....
-
Seats: ADA Standard Section 608.4
Section 608.4 covers the current ADA Standards for seats in shower compartments.
-
Designated Aisle Seats: ADA Standard Section 802.4
Designated aisle seats shall comply with 802.4....
-
4.3.3 WIDTH
The minimum clear width of an accessible route shall be 36 in (915 mm) except at doors (see 4.13.5)....
-
General: ADA Standard Section 610.1
Section 610.1 of the ADA Standards covers information in the current ADA Standards for seats in bathtubs and shower compartments.
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
