Where provided, curb ramp flares shall not be steeper than 1:10.
Search Results "Latch Side Clearance"
-
11B-406.2.2 Sides of curb ramps
-
Maneuvering Clearance: ADA Standard Section 404.3.2
Section 404.3.2 covers the current ADA Standards for maneuvering clearance at automatic and power-assisted doors and gates.
-
Platform to Hoistway Clearance: ADA Standard Section 408.4.3
Section 408.4.3 covers the ADA Standards for the required clearance between the car platform and the hoistway landing of limited-use/application elevators.
-
2010 ADA Standards - Plan Review Tool - Doors
2010 ADA Standards - Plan Review Tool - Doors Click here to view/download the pdf, Page 1 of 2 (258 KB) Click here to view/download the pdf, Page 2 of 2 (264 KB) * * * * * *...
-
Clearance: ADA Standard Section 804.2
Where a pass through kitchen is provided, clearances shall comply with 804.2.1. Where a U-shaped kitchen is provided, clearances shall comply with 804.2.2....
-
Yale YSSL10 Auxiliary Latch
Offering ADA compliance and UL/cUL fire rating for up to 3 hours, the YSSL10 auxiliary latch is perfect for securing your auxiliary doors, such as dutch doors, communicating doors, or shallow...
-
Door and Gate Hardware [§404.2.7]
Latches and locks with small parts that must be manipulated can be difficult to use and will not comply if pinching is necessary....
-
11B-604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404, except that if the approach is to the latch side of the compartment door, clearance between the door...
-
11B-604.8.2.2 Doors
Toilet compartment doors, including door hardware, shall comply with Section 11B-404, except that if the approach is to the latch side of the compartment door, clearance between the door...
-
Vertical Clearance: ADA Standard Section 503.5
Section 503.5 covers the current ADA Standards for the vertical clearance at passenger loading zones.
-
Figure 404.2.4.1(c) Maneuvering Clearances at Manual Swinging Doors and Gates: Front Approach, Push Side with Closer and Latch – Drawing from the U.S. Access Board
-
Clearance: ADA Standard Section 607.2
Section 607.2 covers the current ADA Standards for bathtub clearances.
-
Swinging Doors and Gates: ADA Standard Section 404.2.4.1
Section 404.2.4.1 covers the current ADA Standards for maneuvering clearances at swinging doors and gates.
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
11B-306.2.4 Additional clearance
Space extending greater than 6 inches (152 mm) beyond the available knee clearance at 9 inches (229 mm) above the finish floor or ground shall not be considered toe clearance....
-
Width: ADA Standard Section 306.2.5
Section 306.2.5 covers the current ADA Standards for toe clearance width.
-
Width: ADA Standard Section 306.3.5
Section 306.3.5 covers the current ADA Standards for knee clearance width.
-
11B-605.5.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side...
-
11B-605.5.4 Toe Clearance
The front partition and at least one side partition shall provide a toe clearance of 9 inches (229 mm) minimum above the finish floor and 6 inches (152 mm) deep minimum beyond the compartment-side...
-
General: ADA Standard Section 306.2.1
Section 306.2.1 of the ADA Standards covers information in the current ADA Standards for toe clearance.
-
General: ADA Standard Section 306.3.1
Section 306.3.1 of the ADA Standards covers information in the current ADA Standards for knee clearance.
-
11B-308.3 Side reach
[See subsections ...]
-
11B-308.3 Side reach
[See subsections ...]
-
I. Security
Is the security latch or bolt on the hall door mounted no higher than 48" above the floor so it is within the reach of persons who use wheelchairs and is it operable with one hand, without...
