2.3.1 Define the measurement protocols to be used to check for compliance with the tolerances and standards. This may include where measurements are made, how many should be made,...
Search Results "Design"
-
2.3.1
-
2.3.2
2.3.2 Define the measurement tools that should be used. The acceptable tools should be selected based on the accuracy required and a reasonable balance between the accuracy of the...
-
2.4.1
2.4.1 Based on the methods for measuring compliance, define what remedial actions are acceptable when construction elements exceed tolerances. These may include total replacement,...
-
2.4.2
2.4.2 When defining acceptable methods of correction for a non - complying element, give reasonable consideration to how the remedial action may affect construction time, cost,...
-
3 - Best practices for pre - construction meetings
The designer can ask if everyone has read the specification requirements and interpreted the drawings correctly....
-
Phasing in Play Areas
“Phased Designs” are play areas developed to be installed in different stages, allowing the play area to grow in a planned manner while accommodating budgets, fund raising, or community...
-
4 - Best practices for construction observation
4 - Best practices for construction observation Construction observation is the final step in building an accessible element to meet design and regulatory requirements....
-
§8.32(a)
(a) Effective as of July 11, 1988, design, construction, or alteration of buildings in conformance with sections 3-8 of the Uniform Federal Accessibility Standards (UFAS) shall be deemed...
-
§8.32(e)
(e) Except as otherwise provided in this paragraph, the provisions of §§8.21(a) and (b), 8.22(a) and (b), 8.23, 8.25(a)(1) and (2), and 8.29 shall apply to facilities that are designed,...
-
Issue 14: Inspection of contractor’s work - Beware of field changes!
Figure 18: APS and curb ramps that were not installed as designed. Figure 19: Another view of the same corner....
-
Section 2: Accessibility Guidelines.
The issues addressed in this section concern the technical specifications set forth in the Fair Housing Accessibility Guidelines.
-
3. If I comply with the California accessibility requirements, am I in compliance with ADA?
Remember that the accessibility requirements are reviewed by the building department only when a project is submitted for permit (meaning when you design, construct, alter, remodel, add,...
-
ADA and Accessibility Compliance Plan Reviews
Some recent court decisions place the direct responsibility/liability for compliance on the owner, not the design and construction team....
-
§40.4 Standards.
Residential structures subject to this part shall be designed, constructed or altered to ensure that physically handicapped persons have access to, and use of, these structures....
-
Kitchen Cabinets
42” a.f.f. (above finished floor) wall-mounted cabinets and counters for tall people. With a remodel, they can be lowered to 32” a.f.f. for wheelchair users 10”...
-
Conclusions and Recommendations
Moreover, the best practice designs reflect this understanding and are attempts to address the problems....
-
Sec.36.401(a) General
(a) General.
-
1001.1 Scope
Unless otherwise modified or specifically addressed in Chapter 10, all other requirements in this document apply to the design and construction of recreation facilities....
-
Section 35.151 New construction and alterations (Section-by-Section Analysis)
alterations (Section-by-Section Analysis) Section 35.151(a), which provided that those facilities that are constructed or altered by, on behalf of, or for the use of a public entity shall be designed...
-
§ 35.151(a) Design and construction
(a) Design and construction....
-
§100.205 Design and construction requirements.
[54 FR 3283, Jan. 23, 1989, as amended at 56 FR 11665, Mar. 20, 1991; 73 FR 63616, Oct. 24, 2008]
-
§100.205(a)
(a) Covered multifamily dwellings for first occupancy after March 13, 1991 shall be designed and constructed to have at least one building entrance on an accessible route unless it is impractical...
-
§100.205(e)
(e)
-
§100.205(i)
(i) This subpart does not invalidate or limit any law of a State or political subdivision of a State that requires dwellings to be designed and constructed in a manner that affords handicapped...