Where building elements such as coat hooks, lockers, or operable parts are designed for use primarily by children, the suggested dimensions of Table 11B-308.4 shall be permitted....
Search Results "Absolute Dimension"
-
11B-308.4 Suggested reach ranges for children
-
Figure 407.4.1(a) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(b) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(e) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(d) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
Figure 407.4.1(c) Elevator Car Dimensions – Drawing from the U.S. Access Board
-
§ 38.153(c)(2) Exception
(2) Exception. Where compliance with the door width requirement of paragraph (c)(1) of this section is not feasible, the minimum door width shall be 27 in (685 mm).
-
§ 38.159(b)(6) Platform surface
(6) Platform surface. The platform surface shall be free of any protrusions of 1/4 inch (6.5 mm) high and shall be slip resistant. The platform shall have a minimum clear width of 28...
-
CASI California Survey Reports Acceptance Criteria - Construction and Manufacturing Tolerances AC 02-12
Dimensions that are not stated as "maximum" or "minimum" are absolute. 11B-104.1.1 Construction and Manufacturing Tolerances....
-
Chapter M1 Application and Administration
[See subsections ...]
-
§ 38.125(b)(6) Platform surface
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant. The lift platform shall have a minimum clear width of...
-
(1)(a)
(a) The minimum clear floor area should be 35 inches (890 mm) by 60 inches (1525 mm). Permanently installed fixtures may overlap this area a maximum of 6 inches (150 mm), if the...
-
Providing Appropriate Information About Accessibility
Forest Service policy is to provide nonjudgmental information about programs and facilities so that visitors may choose the areas, activities, and facilities that best meet their...
-
Handrails [§504.6, §505]
Handrails [§504.6, §505] Handrails are required on both sides of stairs and must be continuous within the full length of each stair flight. Inside handrails on switchback or...
-
Dimensions: ADA Standard Section 810.2.2
Reader: The Department of Transportation’s ADA standards indicate that compliance is required to the extent construction specifications are within a public entity's control: 810.2.2 Dimensions...
-
§ 38.107(a)(1)
(1) The minimum clear floor area shall be 35 inches by 60 inches. Permanently installed fixtures may overlap this area a maximum of 6 inches, if the lowest portion of the fixture is...
-
Selenia Dimensions Mammography System
Selenia Dimensions Mammography System What if we could find breast cancers earlier? See lesions more clearly? Reduce the number of unnecessary biopsies?...
-
Dimensions and Capitalization: ADA Standard Section 703.3.1
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059 (1.5 mm) to 0.063 (1.6 mm)...
-
11B-810.2.2 Dimensions
Transportation's ADA Standards indicate that compliance is required to the extent construction specifications are within a public entity's control: [ADA Title II - Public Transportation] 810.2.2 Dimensions...
-
11B-810.2.2 Dimensions
Transportation's ADA Standards indicate that compliance is required to the extent construction specifications are within a public entity's control: [ADA Title II - Public Transportation] 810.2.2 Dimensions...
-
810.2.2 Dimensions
810.2.2 Dimensions....
-
Room Dimensions
Room Dimensions ADAAG does not specify room dimensions; these vary according to the number and configuration of fixtures, room layout, and the way various spatial requirements are met...
