One of those changes effects this section: IV....
Search Results "Section 505"
Filters
Commonly Searched Documents
-
7.11(a) Collective Bargaining Agreements
-
11B-219.3 Receivers
Twenty-five percent minimum of receivers provided, but no fewer than two, shall be hearing-aid compatible in accordance with Section 11B-706.3. [2010 ADAS] 219.3 Receivers. ...
-
RECOMMENDED CHANGE
RECOMMENDED CHANGE Revise the Section 5.4.11 recommendation as follows: The Committee recommends transfer supports and connections contain the strength to resist vertical forces of...
-
Picnic Tables [1011.2 and 1011.4]
The wheelchair space must be positioned for a forward approach and provide knee and toe clearance under the table that complies with section 306 of the ABA Standards....
-
Table 2
The impacts are analyzed in the regulatory assessment and discussed below under Cross Slope (R302.6) in the Section-by-Section Analysis. 25The requirements analyzed in Table 2 include...
-
Step 3: Apply the Accessibility Provisions
This step involves looking at FSTAG, sections 7.4.1 through 7.4.8, which contain the technical requirements for trail grade, cross slope, resting interval, surface, clear tread width, passing...
-
3.2.2.2. Medium Accessibility Baseline
The Medium Accessibility baseline is used in the cost estimation for the primary analysis presented in Section 4.1. ...
-
Path Width
Section 4.2.1 of the ADAAG requires a minimum clear width of 0.815 m (32 inches) at a point, and 0.915 m (36 inches) continuously, for single wheelchair passage....
-
4.2.1. Low Accessibility Baseline
As described in Section 3.2.2.1, one of the alternative baselines is the Low Accessibility baseline, which is the most conservative option. ...
-
11B-407.4.1 Car dimensions
Exception: In existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor...
-
11B-219.3 Receivers
Twenty-five percent minimum of receivers provided, but no fewer than two, shall be hearing-aid compatible in accordance with Section 11B-706.3. [2010 ADAS] 219.3 Receivers. ...
-
1015.3 Height
The guard height in assembly seating areas shall comply with Section 1029.17 as applicable....
-
11B-407.4.1 Car dimensions
Exception: In existing buildings, where existing shaft configuration prohibits strict compliance with Section 11B-407.4.1, existing elevator car configurations that provide a clear floor...
-
11B-219.3 Receivers
Twenty-five percent minimum of receivers provided, but no fewer than two, shall be hearing-aid compatible in accordance with Section 11B-706.3. [2010 ADA Standards] 219.3 Receivers....
-
6 [§ 4.7.7]
If the curb ramp you are surveying has detectable warnings but they do not cover the entire ramp run, explain how they are different in the “Comments” section at the bottom of the form....
-
F216.2 Designations
Section F216.2 applies to signs that provide designations, labels, or names for interior rooms or spaces where the sign is not likely to change over time....
-
Signs
Section 216.10 of the 2010 Standards requires each covered assembly area to provide signs at each auditorium to inform patrons that assistive listening systems are available....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
382.99 What agreements must carriers have with the airports they serve?
present rule, carriers serving U.S. airports must have agreements with the airport operators to provide, operate, and maintain lifts and ramps used to meet the boarding requirement of section...
-
Detectable Warnings
These requirements are paralleled in the Board’s ADA Accessibility Guidelines for Transportation Vehicles.28 For simplicity, the Board has replaced requirements in section 810.5 with references...
-
Aisle Seats
Section 802.4 provides technical criteria for designated aisle seats....
-
Building Entrance
Building entrance requirements are in Section D of the 2016 Checklist found in Part 3 of this document....
-
11B-806.3 Guest rooms with communication features
Guest rooms required to provide communication features shall comply with Section 11B-806.3. [2010 ADAS] Advisory 806.3 Guest Rooms with Communication Features. ...
-
382.35 May carriers require passengers with a disability to sign waivers or releases?
We hope that many of the practices specifically banned in this section are only of historical interest (e.g., making passengers with disabilities sit on blankets or restricting such passengers...