There are different technical requirements for the clear ground space at water utility hookups in camping units required to provide mobility features, which are discussed in the next section...
Search Results "Circular Cross Section"
Filters
Commonly Searched Documents
-
Water Hydrants and Water Spouts [1011.2, 1011.3, and 1011.6]
-
Introduction
Introduction The Access Board is an independent federal agency established by section 502 of the Rehabilitation Act (29 U.S.C. 792).1 The Access Board is responsible for developing accessibility...
-
T603.5 Securement Systems for Rear-Facing Wheelchair Positions
ISO Standard 10865-1:2012(E) is incorporated by reference into this section with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51....
-
2. DEFINE YOUR COMMUNITY
Record your findings in the community overview section of your emergency plan template....
-
OTHER SPECIFIC BARRIERS
Neither the ADA, Section 504, nor state law requires Plaintiffs to identify each and every barrier limiting access to the City's pedestrian routes....
-
Bias Toward Wheelchair Users
(See Section 804(f)(3)(A) of the Act and 24 CFR 100.203 of the regulations....
-
Websites
In the preamble to the rule implementing Section 1557, OCR provided an example of the application of Section 1557 to a health program or activity that uses a website: “a Health Insurance...
-
Foreign Air Carriers
In addition, in July 2003 DOT amended part 382 by adding a new section, 382.70, that requires both U.S. carriers and foreign carriers to record and report to DOT on written disability-related...
-
240.1 General
., preschool (ages 2 to 5) and school age (ages 5 to 12)), each play area must comply with this section....
-
11B-609.3 Spacing
For L-shaped or U-shaped grab bars complying with Section 11B-609.9 (Alternate Configuration) the space between the walls and the grab bar shall be 1½ inches (38 mm) minimum for a distance...
-
End of Document
SADLER Attorneys, Disability Rights Section Civil Rights Division U.S....
-
Maintenance
Components can be sections of bridges or boardwalks, signs, fencing and railings, siding, windows, and roofing....
-
3.4.5. Unit Costs by Venue
The unit costs for all required equipment discussed in Section 3.4.1 through Section 3.4.4 are summarized by venue type in Table 3-23 below....
-
6.1 General
Removable beach access routes shall not be required to comply with the grade requirements in section 6.7 and the resting interval requirement in section 6.8. Exception 4....
-
ADA Tolerances - Additional Resources
., David Kent Ballast, FAIA, CSI, John Wiley & Sons Hawaii State Department of Transportation, Section 01-4117, Barrier-Free Quality Control, guide specification, Hawaii DOT Specification...
-
Structural Impracticability—28 CFR 35.151
compliance is considered structurally impracticable ‘‘only in those rare circumstances when the unique characteristics of terrain prevent the incorporation of accessibility features.’’ 16 HUD’s Section...
-
Signatures and Contact Information Page
KIJEWSKI Deputy Chief Disability Rights Section Civil Rights Division /s/ Dov Lutzker DOV LUTZKER, Trial Attorney California Bar 185106 Disability Rights Section Civil Rights...
-
11B-609.3 Spacing
For L-shaped or U-shaped grab bars complying with Section 11B-609.9 (Alternate Configuration) the space between the walls and the grab bar shall be 1½ inches (38 mm) minimum for a distance...
-
11B-404.2.10 Door and gate surfaces
Sliding doors shall not be required to comply with Section 11B-404.2.10. 2....
-
11B-224.1 General
Hotels, motels, inns, dormitories, resorts and similar transient lodging facilities shall provide guest rooms in accordance with Sections 11B-224.1 through 11B-224.6....
-
1136A.1 Receptacle heights
If the reach is over a physical barrier or an obstruction (for example, a kitchen base cabinet), receptacles shall be located within the reach ranges specified in Section 1138A.3....
-
11B-609.3 Spacing
For L-shaped or U-shaped grab bars complying with Section 11B-609.9 the space between the walls and the grab bar shall be 1½ inches (38 mm) minimum for a distance of 6 inches on either side...
-
11B-404.2.10 Door and gate surfaces
Exceptions: Sliding doors shall not be required to comply with Section 11B-404.2.10....
-
11B-224.1 General
Hotels, motels, inns, dormitories, resorts and similar transient lodging facilities shall provide guest rooms in accordance with Sections 11B-224.1 through 11B-224.6....