Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer....
Search Results "Viewing Distance"
-
1002.5 Amusement Ride Seats Designed for Transfer
-
Audible Information Systems (slide 14)
There’s a distance delay of about three feet right now, so you’re actually [be] three feet past the sign before it transmits to a Blue Tooth phone or earpiece that tells you what that sign...
-
505.6 Gripping Surface
The distance between horizontal projections and the bottom of the gripping surface shall be permitted to be reduced by 1/8 inch (3.2 mm) for each 1/2 inch (13 mm) of additional handrail...
-
Trailhead Signs
The proposed rule would have required the signs to include information on the total distance of the trail and, where exceptions have been used, the location of the first point where the...
-
Roughness Measurement
surface profiles were measured with a custom-built pathway measurement tool (PathMeT), which was created from a power WC frame that was instrumented with a wheel encoder and an Acuity AR700 distance...
-
1016.5 Obstacles
Where possible, obstacles that cross the full width of outdoor recreation access routes should be separated by a distance of 48 inches (1220 mm) minimum....
-
Why test on straight courses and P-shaped turning courses?
The “P” courses were designed so that the subject was turning for approximately 10% of the total distance....
-
Error/Omission: Where toilet rooms or bathrooms are provided, not all public and common use toilet rooms and bathrooms (including locker rooms and toilet rooms for employee use) are accessible.
Result: People with disabilities are restricted to a limited number of toilet rooms and may have to travel long distances to the accessible toilet room while others can use any toilet...
-
11B-704.2.1.2 Forward approach
Where a forward approach is provided, the distance from the front edge of a counter within the telephone enclosure to the face of the telephone unit shall be 20 inches (510 mm) maximum....
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer....
-
11B-407.3.4 Door and signal timing
car start to close shall be calculated from the following equation: T = D/(1.5 ft/s) or T = D/(457 mm/s) = 5 seconds minimum where T equals the total time in seconds and D equals the distance...
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer. ◼...
-
Landscape Forms Inc. Metro 40 Rest Bench
Refer to materials/colors link on this page to view standard selections....
-
Landscape Forms Inc. Arcata Collection Benches
Refer to materials/colors link on this page to view standard selections. Arcata bench is 74" long and is available backed or backless. The backed bench is available with arms....
-
1. Thigh Breadth
Thigh breadth for this analysis was computed as the larger of two dimensions, the horizontal distance between the lateral (outer) aspect of the hips, and the horizontal distance between...
-
2.2.2.2 New York State Standards
Measurements should be made at a distance 10 cm from the silhouette. (Note: 10 mm would appear to be a more realistic distance.)...
-
Exemptions for Entire Trail or Beach Access Route
exceeds 40 percent for over 20 feet; A trail obstacle 30 inches high or more runs across the full tread width of the trail; The trail surface is neither firm nor stable for a distance...
-
Restaurants and Cafeterias: ADA Standard Section 206.2.5
Section 206.2.5 covers scoping requirements in the most current ADA Standards for accessible routes in restaurants and cafeterias
-
Outdoor Developed Areas: ADA Standard Section 9.
Review the updated information on the revisions to the ADA Standards regarding outdoor developed areas.
-
General Holding Cells and General Housing Cells: ADA Standard Section 232.2
Section 232.2 covers scoping requirements in the current ADA Standards for general holding cells and general housing cells.
-
404.2.11 Vision Lights
Doors, gates, and side lights adjacent to doors or gates, containing one or more glazing panels that permit viewing through the panels shall have the bottom of at least one glazed panel...
-
ADA Checklist for Emergency Shelters
Additional copies of this publication may be obtained, viewed or downloaded from the Publications section of the ADA Website (www.ada.gov) or by calling the ADA Information Line at 800‒514...
-
Identification of Available Accessible Seating
Typically information about location, price, view, and seat availability is provided....
