Exercise machines and equipment shall have a clear floor space complying with 305 positioned for transfer or for use by an individual seated in a wheelchair....
Search Results "Transfer Side"
Commonly Searched Documents
- 
    
  
  1004.1 Clear Floor Space
  
 - 
    
  
  11B-1004.1 Clear floor space
  
Exercise machines and equipment shall have a clear floor space complying with Section 11B-305 positioned for transfer or for use by an individual seated in a wheelchair....
 - 
    
  
  11B-1004.1 Clear floor space
  
Exercise machines and equipment shall have a clear floor space complying with Section 11B-305 positioned for transfer or for use by an individual seated in a wheelchair....
 - 
    
  
  Amusement Rides: ADA Standard Section 206.2.9
  
Section 206.2.9 covers scoping requirements in the most current ADA Standards for accessible routes in amusement rides.
 - 
    
  
  11B-206.2.9 Amusement rides
  
Amusement rides required to comply with Section 11B-234 shall provide accessible routes in accordance with Section 11B-206.2.9. Accessible routes serving amusement rides shall comply...
 - 
    
  
  9.b [§ 4.7.5]
  
9.b [§ 4.7.5] If the sidewalk at the top of the ramp (“x”) is less than 48 inches wide and the curb ramp you are surveying has flared sides, answer this question....
 - 
    
  
  Meeting User Needs
  
Meeting User Needs The primary goals of the alternative designs were to accommodate independent transfer and use of a toilet, tub, or shower as well as assistance by as many as two care...
 - 
    
  
  M305.2.4 Cross Section (Section-by-Section Analysis)
  
The proposed rule did not provide specific requirements for the cross section of transfer supports....
 - 
    
  
  M302.2.2 Size
  
The transfer surface shall be 21 inches (610 mm) wide minimum and 15 inches (381 mm) deep minimum. Advisory M302.2.2 Size....
 - 
    
  
  Wheelchair Storage Space
  
Wheelchair Storage Space People using wheelchairs and mobility devices need to leave their equipment when they transfer onto rides....
 - 
    
  
  M305.2.5 Surface Hazards
  
Transfer supports and surfaces adjacent to transfer supports shall be free of sharp or abrasive components and shall have eased edges....
 - 
    
  
  9.a [§ 4.7.5]
  
To answer this question you need to determine the slope of the flared sides to make sure it is 10 percent or less....
 - 
    
  
  406.5 Location
  
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
 - 
    
  
  406.5 Location
  
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
 - 
    
  
  Addendum D: Comparison of demographics and transfer height between Phase 1 and Phase 2 of the study
  
[See subsections ...]
 - 
    
  
  1014.1 General 
  
The technical requirements address the entrance to camp shelters (1014.2), including transfer access (1014.2.1) and roll-in access (1014.2.2); and the floor within camp shelters (1014.3)...
 - 
    
  
  Shower Stalls [4.21]
  
ADAAG provides specifications for several types of shower stall designs: roll-in, transfer, and, in hotels (section 9), a combination of the two....
 - Figure 1009.4.5 Grab Bars for Transfer Walls – Drawing from the U.S. Access Board
 - 
    
  
  M302.3 Supports
  
Transfer supports, armrests, and reclining surfaces shall comply with M302.3....
 - 
    
  
  M302.3 Supports
  
Transfer supports, leg supports and reclining surfaces shall comply with M302.3....
 - Figure 608.3.1 Grab Bar for Transfer Type Showers – Drawing from the U.S. Access Board
 - Figure 1009.4.1 Clear Deck Space at Transfer Walls – Drawing from the U.S. Access Board
 - 
    
  
  Self Contained, Closed Products - Side Reach Range
  Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
 - 
    
  
  M305.2.5 Surface Hazards (Section-by-Section Analysis)
  
The proposed rule did not provide any specific restrictions regarding surface hazards around the transfer supports....