Surfaces of transfer walls shall not be sharp and shall have rounded edges....
Search Results "Transfer Seat (Transportation)"
Filters
Commonly Searched Documents
-
11B-1009.4.4 Surface
-
11B-1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
T603.2 Orientation
EXCEPTION: On large non-rail vehicles designed for use by both seated and standing passengers, rear-facing wheelchair securement systems shall be permitted provided that at least one wheelchair...
-
1009.4.4 Surface
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
1009.5.5 Surface
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
Surface
Surface The surface of the transfer platform and steps must not be sharp and must have rounded edges to prevent injuries....
-
Platform Height
Platform Height Transfer platforms must be between 16 and 19 inches high, measured from the deck....
-
Height
Height The transfer wall height must be 16 inches minimum to 19 inches maximum, measured from the deck....
-
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers
5.4.4.1 Transfer Support Distance from Transfer Surface Recommendation for Stretchers The Committee recommends locating the transfer support along the long side of the of the transfer...
-
382.87 What other requirements pertain to seating for passengers with a disability?
382.87 What other requirements pertain to seating for passengers with a disability? These provisions are essentially the same as their counterparts in the existing regulation....
-
Designated Aisle Seats
Designated Aisle Seats....
-
11B-608.2.1 Reserved
ETA Editor's Note The transfer type shower compartments prescribed by 2010 ADAS 608.2.1 are not recognized as an accessible shower in California....
-
§ 38.125(d) Seating
(d) Seating—...
-
ADA and the FTA: Improving Transit Access for People with Disabilities
Transit opens doors to jobs, education, social connections and other opportunities. Since the Americans with Disabilities Act passed in 1990, the transit industry has worked to make...
-
1009.4.2 Height
The height of the transfer wall shall be 16 inches (405 mm) minimum and 19 inches (485 mm) maximum measured from the deck....
-
11B-1009.4.2 Height
The height of the transfer wall shall be 16 inches (406 mm) minimum and 19 inches (483 mm) maximum measured from the deck....
-
11B-1009.4.2 Height
The height of the transfer wall shall be 16 inches (406 mm) minimum and 19 inches (483 mm) maximum measured from the deck....
-
Bemis 2155CT Heavy Duty Plastic Open Front Less Cover Commercial Toilet Seat
This heavy duty open front less cover seat is ideal for any commercial application. Made from durable plastic, the seat resists chips, wears and stains....
-
802.4 Designated Aisle Seats
Designated aisle seats shall comply with 802.4....
-
802.4 Designated Aisle Seats
Designated aisle seats shall comply with 802.4....
-
11B-217.4.7 Transportation facilities
In transportation facilities, in addition to the requirements of Sections 11B-217.4.1 through 11B-217.4.4, where at least one public pay telephone serves a particular entrance to a bus or...
-
3.3.5 Seat Height
Comparisons of research findings on the seat heights for power chairs and scooters showed that mean seat heights measured in the UDI study were comparable to seat heights for the power chairs...
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum....
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum....
