VOLUNTARY COMPLIANCE AGREEMENT BETWEEN THE UNITED STATES OF AMERICA AND THOMAS JEFFERSON UNIVERSITY HOSPITALS INC. & OUTPATIENT IMAGING AFFILIATES, LLC. DJ# 202-62-458
Search Results "Transfer"
Filters
Commonly Searched Documents
-
VOLUNTARY COMPLIANCE AGREEMENT
BETWEEN
THE UNITED STATES OF AMERICA
AND
THOMAS JEFFERSON UNIVERSITY HOSPITALS INC.
&
OUTPATIENT IMAGING AFFILIATES, LLC.
DJ# 202-62-458
-
M305.2.8 Fittings
Transfer supports shall not rotate within their fittings when in place for transfer....
-
M305.2.2 Length (Section-by-Section Analysis)
table at the designated transfer location for at least the minimum width of the transfer surface, with a minimum length of 28 inches....
-
M305.2.7 Clearance (Section-by-Section Analysis)
In the MDE NPRM, the Access Board did not provide any specific requirements for clearances around the transfer support....
-
M305.2.2 Length
The length of transfer supports shall comply with M305.2.2.1 or M305.2.2.2....
-
A4.22.3 Clear Floor Space
The dotted lines designate the minimum clear floor space, depending on the direction of approach, required for wheelchair users to transfer onto the water closet....
-
M305.2.6 Gripping Surface
Transfer support gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides....
-
M305.2.3 Fittings
Transfer supports shall not rotate within their fittings....
-
M305.2.6 Gripping Surfaces (Section-by-Section Analysis)
The proposed rule did not provide any specific requirements regarding gripping surfaces on transfer supports....
-
iv. Lifts
Lifts Medical providers may need lifts to transfer some patients with mobility disabilities safely to examination or treatment tables or chairs or to gurneys or hospital beds....
-
M305.2.7 Clearance
Clearance between the transfer support gripping surface and adjacent surfaces or obstructions shall be 1 ½ inches (38 mm) minimum....
-
M305.2.5 Surface Hazards
Transfer supports and surfaces adjacent to transfer supports shall be free of sharp or abrasive components and shall have eased edges....
-
M305.2.4 Cross Section
Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2....
-
M305 Supports
[See subsections ...]
-
M305 Supports
[See subsections ...]
-
Mega Jailhouse Anti-Suicide Grab Bar with Closure Plate 18 inches - Concealed Mounting
Description: This 18" security / anti-suicide grab bar is fabricated in accordance with ADA specifications and is fully enclosed, thereby abating suicide risk. The grab bar is...
-
M305.2.4 Cross Section (Section-by-Section Analysis)
The proposed rule did not provide specific requirements for the cross section of transfer supports....
-
Evaluation of transfers
of the sample could not transfer to a surface 14” high or lower....
-
M305.2.5 Surface Hazards (Section-by-Section Analysis)
The proposed rule did not provide any specific restrictions regarding surface hazards around the transfer supports....
-
Figure 610.3 Extent of Seat – Drawing from the U.S. Access Board
-
Clear Floor and Turning Space Inside Examination Rooms
The exam table must have sufficient clear floor space next to it so that an individual using a wheelchair can approach the side of the table for transfer onto it....
-
Transfer Compartments
Seats are required in transfer compartments and roll-in showers in transient lodging guest rooms (608.4)....
-
Access Board: Toilet Rooms
This video is part of a longer animation produced by the U.S. Access Board. View the animation video in its entirety on the Access Board's website...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
