[See subsections ...]
Search Results "ITU-T: International Telecommunications Union Telecommunications Standardization Sector"
-
29 CFR Part 1607 Uniform Guidelines on Employee Selection Procedures
-
Chapter M3 Technical Criteria
Chapter M3 provides technical criteria for accessible diagnostic equipment based on the patient positions that the equipment is designed to support, including equipment used by...
-
Appendix to §36.304(d) Compliance Dates and Applicable Standards for Barrier Removal and Safe Harbor
the 1991 Standards must be modified to the extent readily achievable....
-
[2010 ADAS] 105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
-
Standby Power for Platform Lifts
The 2010 Standards at section 207.2 require standby power to be provided for platform lifts that are permitted to serve as part of an accessible means of egress by the IBC....
-
F247.1 General
The Federal Trail Data Standards classify trails by their designed use and managed use.8 A trail has only one designed use that determines the design, construction, and maintenance parameters...
-
F105.2.1 ANSI/BHMA
Copies of the referenced standards may be obtained from the Builders Hardware Manufacturers Association, 355 Lexington Avenue, 17th floor, New York, NY 10017 (http://www.buildershardware.com...
-
105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
-
105.2.1 ANSI/BHMA
ANSI/BHMA A156.10-1999 American National Standard for Power Operated Pedestrian Doors (see 404.3)....
-
[2010 ADAS] 105.2.1 ANSI/BHMA
Copies of the referenced standards may be obtained from the Builders Hardware Manufacturers Association, 355 Lexington Avenue, 17th floor, New York, NY 10017 (http://www.buildershardware.com...
-
Sec. 469.152. Waiver or Modification Prohibited.
The commission may not waive or modify a standard or specification if:...
-
Accessible Fishing Piers and Platforms
Sections 237 and 1005 of the 2010 Standards require at least twenty-five percent (25%) of railings, guards, or handrails (if provided) to be at a 34-inch maximum height (so that a person...
-
4.10.1 GENERAL
Accessible elevators shall be on an accessible route and shall comply with 4.10 and with the American National Standard Safety Code for Elevators, Dumbwaiters, Escalators, and Moving Walks...
-
11B-502.6.4.2
The parking space shall be outlined or painted blue and shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 a minimum 36 inches wide by 36...
-
Figure 707.6.2 Numberic Key Layout – Drawing from the U.S. Access Board
-
11B-502.6.4.2
11B-502.6.4.2 The parking space shall be outlined in blue or painted blue and shall be marked with an International Symbol of Accessibility complying with Section 11B-703.7.2.1 a minimum...
-
Areas for further work
various organizations that represent surface materials and professional groups the following issues were identified as parameters that might be considered in the development of any industry standards...
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room.
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room.
-
803.2 Turning Space
Turning space complying with 304 shall be provided within the room.
-
803.2 Turning Space
803.2 Turning Space. Turning space complying with 304 shall be provided within the room.
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room.
-
11B-803.2 Turning space
Turning space complying with Section 11B-304 shall be provided within the room.
-
NSSN
A national resource for global standards powered by ANSI....
